User manual JVC UX-G3

[. . . ] MICRO COMPONENT SYSTEM UX-G4 UX-G3 Consists of CA-UXG4 and SP-UXG4 Consists of CA-UXG3 and SP-UXG3 INSTRUCTIONS LVT1364-002C [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Store discs in their cases, and keep them in cabinets or on shelves. Keep the unit's disc cover closed when not in use. Continued use of irregular shape discs (heart-shape, octagonal, etc. ) can damage the unit. To stop playing, press 7. The total track (or group) number and total playing time appear on the display. When stop playing audio CD: PRESET GROUP DOWN PRESET GROUP When stop playing MP3 disc: Group folder indicator MP3 TOTAL TOTAL Caution for DualDisc playback The Non-DVD side of a "DualDisc" does not comply with the "Compact Disc Digital Audio" standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended. Total track Total playing number time Total group number Total track number Total playing time does not appear when MP3 disc is loaded. 10 Tag To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit's pivot lightly. To locate a particular point in a track During play, press and hold or 4 (or UP or DOWN 4 on the unit). 4 (DOWN 4): Fast-reverses the tracks. UP PRESET GROUP DOWN PRESET GROUP If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. If no disc is inserted "NO DISC" appears on the display. DO NOT open the disc cover by hand as it will be damaged. Programming the Track Playing Order --Program Play You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks. On the remote control ONLY: Basic Disc Operations While playing a disc, you can do the following operations. 1 Place a disc. If the current source is not the CD player, press CD 6, then 7 before going to the next step. CD To stop playing for a moment During play, press CD 3/8. While pausing, the elapsed playing time flashes on the display. To resume playing, press CD 3/8 again. 3/8 2 Press PROGRAM. The PRGM (program) indicator starts flashing on the display. PROGRAM To go to another track Before or during play, press or 4 (or UP or DOWN 4 on the unit) repeatedly. (UP ): PRGM UP PRESET GROUP 3 Press or 4 to select the track number, then press PROGRAM. Track number Program step number UP PRESET GROUP DOWN PRESET GROUP Skips to the beginning of the next or succeeding tracks. 4 (DOWN 4): Goes back to the beginning of the current or previous tracks. DOWN PRESET GROUP PROGRAM PRGM To go to another track directly using the number buttons On the remote control ONLY: Pressing the number button(s) before or 1 2 3 during play allows you to start playing the track number you want. For track number 15, press OVER, 7 8 9 then press 1, 5. OVER 0 For track number 20, press OVER, then press 2, 0. (For MP3 disc only) For track number 20, press OVER, then press 0, 2, 0. For track number 156, press OVER, then press 1, 5, 6. You can also use the number button(s) to select a track number. For the operation of the number buttons, see "To go to another track directly using the number buttons" on the left column. 1 2 3 4 5 6 7 8 9 OVER 0 When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP selects the first track of each group. 4 Repeat step 3 to program other tracks you want. 11 Continued 5 Press CD 3/8. The tracks are played in the order you have programed. CD Repeating Tracks--Repeat Play You can have all the tracks, the program or individual track currently playing, repeat as many times as you like. 3/8 On the remote control ONLY: When you finished programming the 60th track "FULL" will appear on the display. Press REPEAT repeatedly before or during playback. Each time you press the button, Repeat Play changes as follows, and the following repeat indicators light up on the display: REPEAT RDS SEARCH To stop playing, press 7. UP PRESET GROUP DOWN PRESET GROUP ALL To check the program contents You can check the program contents by pressing PROGRAM repeatedly before or after playback. PROGRAM Repeat indicators When playing back audio CD: ALL To modify the program Press PROGRAM repeatedly until the program step number you want to modify appears. Then follow step 3 of the programming procedure. To add tracks in the program, press PROGRAM repeatedly until "0" appears as the track number. Then follow steps 3 of the programming procedure. PROGRAM Canceled ALL: In Normal Play, repeats all the tracks. In Program Play, repeats all the tracks in the program. [. . . ] Do not touch the shiny surface of the disc, or bend the disc. Put the disc back in its case after use to prevent warping. Be careful not to scratch the surface of the disc when placing it back in its case. Avoid exposure to direct sunlight, temperature extremes, and moisture. Head To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge. Pinch Roller DO NOT use any solvent--such as conventional record cleaner, spray, thinner, or benzine--to clean the disc. To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronic and audio shops). 24 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service. Symptom Power does not come on. [. . . ]