User manual JVC UX-G50

[. . . ] If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If this product is not supplied fitted with a mains plug then follow the instructions given below: IMPORTANT: DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. The wires in the mains lead on this product are coloured in accordance with the following code: Blue : Neutral Brown : Live As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] After loading the disc, the first track of the disc starts playing. When playing audio CD: CD 3/8 When playing MP3 disc: MP3 indicator MP3 Notes for MP3 files The player can only recognize files with "MP3" or "mp3" as the extensions, which can be in any combination of upper and lower case. The file name needs to be up to 20 characters. This unit recognizes files and folders on a disc in the following conditions (including the root folder): up to 512 folders and files. It is recommended that you record your material at a 44. 1 kHz sampling rate, using the 128 kbps data transfer rate. Some MP3 files or discs may not be played back because of their characteristics or recording conditions. MP3 discs requires a longer readout time than normal discs because of the complexity of the folder/file configuration. MP3i and MP3 Pro are not available. Current track Elapsed playing time number Current track Elapsed number playing time The disc automatically stops when the last track has finished playing. While "READING" appears on the display You cannot make any operation until the unit finishes reading the disc. While playing back an MP3 disc ID3 Tag information (the name of the title, artist, and album up to 30 characters) will be shown on the display. When the name is too long to be displayed at once, it is scrolled. 1. 0. UP General notes In general, you will have the best performance by keeping your discs and the mechanism clean. Store discs in their cases, and keep them in cabinets or on shelves. The PRGM indicator goes off from the display. UP PRESET GROUP DOWN PRESET GROUP To clear the program Press 7 for more than 2 seconds while the PRGM indicator lights up on the display. If you press ) to remove the disc when the CD player selected as the source, the program will be also cleared. ALL: In Normal Play, repeats all the tracks. In Program Play, repeats all the tracks in the program. GR. : In Normal Play, repeats all the tracks in a group. In Program Play and Random Play, this function is not available. In Random Play, this function is not available. To cancel Repeat Play, press REPEAT repeatedly until the repeat indicator goes off. REPEAT RDS SEARCH While the PRGM indicator lights Auto Standby function does not take effect. 12 Playing at Random--Random Play You can play the tracks at random. Displaying the Remaining Time during Playback You can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. RANDOM On the remote control ONLY: Press RANDOM. The RANDOM and display. indicators light up on the On the remote control ONLY: Press REMAIN repeatedly. When playing back audio CD: REMAIN RDS MODE RANDOM To stop playing, press 7. It is not possible to activate the Random Play function during Program Play. Each time you press the button, the display changes as follows, and the following remain indicators light up on the display: TOTAL REMAIN Remain indicators REMAIN TOTAL REMAIN* (No Indication) REMAIN: Shows the remaining time of the current track. TOTAL REMAIN: Shows the remaining time of the disc. No indication: Shows the elapsed time of the current track. * Remaining time of the disc (TOTAL REMAIN) will not be displayed in the following cases: During Random Play. [. . . ] DO NOT allow any rubber or plastic to remain in contact with it for a long time. Avoid storing tapes in any of the following places: In dusty places In direct sunlight or heat In moist areas On a TV or speaker Near a magnet To keep the best recording and playback sound quality You need to clean the heads. Clean the heads after every 10 hours of use with a wet-type head cleaning tape (available at electronic and audio shops). When the head becomes dirty, the following symptoms will occur: Sound quality is reduced. Do not touch the highly-polished head with any metallic or magnetic tools. Capstan Handling discs Remove the disc from its case by holding it at the edge while pressing the center hole lightly. [. . . ]