User manual JVC UX-H300

[. . . ] MICRO COMPONENT SYSTEM UX-H330 UX-H300 Consists of CA-UXH330 and SP-UXH330 Consists of CA-UXH300 and SP-UXH300 INSTRUCTIONS LVT1193-003A [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] Keep the unit's disc cover closed when not in use. Continued use of irregular shape discs (heart-shape, octagonal, etc. ) can damage the unit. To stop playing, press 7. The total track (or group) number and total playing time appear on the display. When stop playing audio CD: UP PRESET GROUP DOWN PRESET GROUP When stop playing MP3 disc: Group folder indicator MP3 Total track Total playing number time Total group number Total track number Total playing time does not appear when MP3 disc is loaded. 10 To remove the disc, press ) OPEN on the unit, then take out the disc by holding it at the edges while pressing the unit's pivot lightly. To locate a particular point in a track During play, press and hold or 4 (or UP or DOWN 4 on the unit). 4 (DOWN 4): Fast-reverses the tracks. While playing back an MP3 disc This function is not available. UP PRESET GROUP DOWN PRESET GROUP If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start. If no disc is inserted "NO DISC" appears on the display. DO NOT open the disc cover by hand as it will be damaged. Programming the Track Playing Order --Program Play You can arrange the order in which tracks play before you start playing. You can program up to 40 tracks. Basic Disc Operations While playing a disc, you can do the following operations. To stop playing for a moment During play, press CD 3/8. While pausing, current track number and elapsed playing time flash on the display. To resume playing, press CD 3/8 again. CD On the remote control ONLY: 3/8 1 Place a disc. If the current source is not the CD player, press CD 6, then 7 before going to the next step. 2 Press PROGRAM. UP PRESET GROUP PROGRAM To go to another track Before or during play, press or 4 (or UP or DOWN 4 on the unit) repeatedly. (UP ): The PRGM (program) indicator appears on the display. DOWN PRESET GROUP PRGM Skips to the beginning of the next or succeeding tracks. 4 (DOWN 4): Goes back to the beginning of the current or previous tracks. 3 Press or 4 to select the track number, then press PROGRAM. Track number Program step number UP PRESET GROUP DOWN PRESET GROUP To go to another track directly using the number buttons On the remote control ONLY: Pressing the number button(s) before or 1 2 3 during play allows you to start playing the track number you want. For track number 15, press OVER, 7 8 9 then press 1, 5. OVER 0 For track number 20, press OVER, then press 2, 0. (For MP3 disc only) For track number 20, press OVER, then press 0, 2, 0. For track number 156, press OVER, then press 1, 5, 6. PRGM PROGRAM You can also use the number button(s) to select a track number. For the operation of the number buttons, see "To go to another track directly using the number buttons" on the left column. 1 2 3 4 5 6 7 8 9 OVER 0 When you are programming from MP3 disc Pressing PRESET GROUP or PRESET GROUP selects the first track of each group. 11 Continued 4 Repeat step 3 to program other tracks you want. Repeating Tracks--Repeat Play You can have all the tracks, the program or individual track currently playing, repeat as many times as you like. 5 Press CD 3/8. The tracks are played in the order you have programed. CD 3/8 On the remote control ONLY: Press REPEAT repeatedly before or during playback. REPEAT RDS SEARCH If you try to program a 41st track " FULL " will appear on the display. Each time you press the button, Repeat Play changes as follows, and the following repeat indicators light up on the display: UP PRESET GROUP To stop playing, press 7. DOWN PRESET GROUP ALL Repeat indicators When playing back audio CD: To check the program contents You can check the program contents by pressing PROGRAM repeatedly before or after playback. PROGRAM ALL Canceled To modify the program Press PROGRAM repeatedly until the program step number you want to modify appears. Then follow step 3 of the programming procedure. To add tracks in the program, press PROGRAM repeatedly until "0" appears as the track number. Then follow steps 3 of the programming procedure. PROGRAM ALL: In Normal Play, repeats all the tracks. In Program Play, repeats all the tracks in the program. : Repeats one track. When playing back MP3 disc: PROGRAM ALL GR. Canceled To clear the program Press 7 before or after playback. The PRGM indicator disappears from the display and all the memory contents will be erased (resumes to Normal Play). [. . . ] Do not touch the shiny surface of the disc, or bend the disc. Put the disc back in its case after use to prevent warping. Be careful not to scratch the surface of the disc when placing it back in its case. Avoid exposure to direct sunlight, temperature extremes, and moisture. Head To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge. Pinch Roller DO NOT use any solvent--such as conventional record cleaner, spray, thinner, or benzine--to clean the disc. To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronic and audio shops). 24 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service. Symptom Power does not come on. [. . . ]