User manual JVC UX-HB4B

[. . . ] MICRO COMPONENT SYSTEM UX-HB4 Consists of CA-UXHB4 and SP-UXHB4 INSTRUCTIONS LVT1266-001A [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] You can program up to 99 tracks. If you try to program a 100th track "Program Full" will appear on the display. To stop playing, press 7. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP On the remote control ONLY: / SELECT DOWN PRESET GROUP 1 Place a disc. If the current source is not the CD player, press CD 6, then 7 before going to the next step. 2 Press PROGRAM. The PRGM (program) indicator and the program step number appear and flash on the display. PROGRAM To check the program contents While the PRGM indicator is lit on the display, you can check the program contents by pressing or 4 repeatedly before or after playback. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP / SELECT DOWN PRESET GROUP To add tracks in the program, repeat steps 2 and 3 of the programming procedure. The track will be added on the last step. 3 Press or 4 to select the track number, then press PROGRAM. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP To clear the program Press 7 before or after playback when the PRGM indicator is lit on the display. "Clear Program" appears and the PRGM indicator disappears from the display. All the memory contents will be erased (resumes to Normal Play). The programmed tracks are also erased in the following cases: Pressing ) OPEN to open the disc cover Turning off the unit Changing the source SEARCH/ SCROLL DOWN UP / SELECT PRESET GROUP SEARCH/ SCROLL UP DOWN PRESET GROUP / SELECT DOWN PRESET GROUP PROGRAM You can also use the number button(s) to select a track number. For the operation of the number buttons, see "To go to another track directly using the number buttons" on page 13. 1 2 3 4 5 6 7 8 9 During Program Play Auto Standby function does not take effect. 0 +10 14 Repeating Tracks--Repeat Play You can have all the tracks, the program or individual track currently playing, repeat as many times as you like. To exit from Random Play, press 7 or RANDOM. You cannot activate the Random Play function during Program Play. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP / SELECT DOWN PRESET GROUP On the remote control ONLY: Press REPEAT. Each time you press the button, Repeat Play changes as follows, and the following repeat indicators light up on the display: Repeat indicators REPEAT /FM MODE Displaying the Remaining Time during Playback (for Audio CD) When playing back audio CD, you can display the remaining time of the current track/disc and the elapsed time of the current track/disc during playing. On the remote control ONLY: When playing back audio CD: ALL Press REMAIN repeatedly. Each time you press the button, the display changes as follows: Track Rem. Play Normal indication REMAIN /BEAT CUT Canceled Disc Time Play Disc Rem. In Program Play, repeats all the tracks in the program. When playing back MP3 disc: GR. Canceled ALL Track Rem. Play: Shows the remaining time of the current track. Disc Time Play: Shows the remaining time of the disc. Play: Shows the elapsed time of the disc. Normal indication: Shows the elapsed time of the current track. : Repeats one track. In Random Play, this function is not available. In Program Play and Random Play, this function is not available. In Program Play, repeats all the tracks in the program. REPEAT /FM MODE Displaying the Tag Information (for MP3 disc) You can display the ID3 Tag information of the MP3 disc. On the remote control ONLY: Press Display during MP3 playback. Each time you press the button, the display changes as follows: Title Normal indication Artist Album DISPLAY To cancel Repeat Play, press REPEAT repeatedly until the repeat indicator goes off. Playing at Random--Random Play You can play the tracks at random. On the remote control ONLY: Press RANDOM. The RND. indicator lights up on the display. RND. indicator RANDOM Title: Artist: Album: Normal indication: Shows name of the track. Shows the group name and track name currently played back. If the file does not have any information, the second line will be displayed in blank. 15 Playing Back Tapes Playing Back a Tape You can play back type I tapes only. If no cassette is inserted when you press TAPE < "No TAPE" appears on the display. 1 Press PUSH OPEN. The cassette holder opens. PUSH OPEN To stop playing, press 7. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP / SELECT DOWN PRESET GROUP SCROLL DOWN 4 SELECT 7 SCROLL UP 2 Put a cassette in with the exposed part of the tape down. To fast-wind to the left or to the right, press or 4 (or or 4 on the unit). "Fast Wind" appears and the tape direction indicator ( 33 or 22 ) scrolls on the display. SEARCH/ SCROLL DOWN UP PRESET GROUP SEARCH/ SCROLL UP / SELECT DOWN PRESET GROUP SCROLL DOWN 4 SELECT 7 SCROLL UP To remove the cassette, press PUSH OPEN on the unit while playback is stopped. PUSH OPEN 3 Close the cassette holder gently. To play both sides--Reverse Mode You can set the deck to play just one side of a tape, both sides once, or both sides continuously. On the remote control ONLY: Press REV. MODE (Reverse Mode). Each time you press the button, the Reverse Mode changes as follows: REV. [. . . ] Do not touch the shiny surface of the disc, or bend the disc. Put the disc back in its case after use to prevent warping. Be careful not to scratch the surface of the disc when placing it back in its case. Avoid exposure to direct sunlight, temperature extremes, and moisture. Head To clean the disc Wipe the disc with a soft cloth in a straight line from center to edge. Pinch Roller DO NOT use any solvent--such as conventional record cleaner, spray, thinner, or benzine--to clean the disc. To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronic and audio shops). 30 Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer for service. Symptom Power does not come on. [. . . ]