User manual JVC UX-P30

[. . . ] MICRO COMPONENT SYSTEM UX-P30--Consists of CA-UXP30 and SP-UXP30 CD-R/RW PLAYBACK MICRO COMPONENT SYSTEM UX-P30 SOUND AHB PRO STANDBY/ON VOLUME DISPLAY SLEEP STANDBY CD 3/8 TAPE 23 FM/AM + PROG SOUND MODE RANDOM AUTO PRESET REPEAT AUX AUX FM MODE FM/AM CLOCK CD TAPE TIMER 4 7 CD CANCEL DISPLAY MODE MULTI KEY PTY /EON SET REV. MODE REC AHB PRO VOLUME PHONES RM-SUXP3R REMOTE CONTROL SP-UXP30 CA-UXP30 SP-UXP30 INSTRUCTIONS GVT0115-008B [B] Warnings, Cautions and Others CAUTION-- IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] To search for a program using the PTY codes REMEMBER you must preset FM RDS stations to use the PTY codes. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. On the remote control ONLY: 1 Press PTY/EON until "PTY" and "SELECT" alternately appear on the display. PTY /EON More about RDS Some FM stations do not provide RDS signals. RDS services vary among FM RDS stations. For details on RDS services in your area, check with local radio stations. RDS may not work correctly if the received station is not transmitting the signals properly or if the signal strength is weak. Each time you press the button, RDS operation mode changes as follows: PTY SELECT E. O. NET SELECT (See page 14. ) Canceled 2 Changing the RDS Information You can see RDS information on the display while listening to an FM station. Press or 4 until the PTY code you want appears on the display. Each time you press the button, the PTY codes change as follows: NEWS " AFFAIRS " INFO " SPORT " EDUCATE " DRAMA " CULTURE " SCIENCE " VARIED " POP M " ROCK M " EASY M " LIGHT M " CLASSICS " OTHER M " WEATHER " FINANCE " CHILDREN " SOCIAL " RELIGION " PHONE IN " TRAVEL " LEISURE " JAZZ " COUNTRY " NATION M " OLDIES " FOLK M " DOCUMENT " TRAFFIC " (back to the beginning) On the remote control ONLY: Press DISPLAY MODE. Each time you press the button, the display changes to show the following information: PS PTY Station frequency (or preset channel no. ) RT (Radio Text) (Program Service) (Program Type) DISPLAY MODE 3 If no PS, PTY, or RT signals are sent by a station "NO PS, " "NO PTY, " or "NO RT" appears on the display. On the characters displayed When the display shows PS, PTY or RT signals: --The display shows upper case letters only. --The display cannot show accented letters; For example, "A" may represent accented "A's" like ", , , , and . " Press PTY/EON once again. PTY /EON While searching, "SEARCH" and the selected PTY code alternately appear on the display. The unit searches 30 preset FM stations, stops when it finds the one you have selected ("FOUND" appears), and tunes in that station. If no program is found, "NOTFOUND" appears on the display and the unit returns to the last received station. To stop searching any time during the process Press PTY/EON on the remote control while searching. 13 Switching Temporarily to a Program Type of Your Choice The Enhanced Other Networks function allows the unit to switch temporarily to a broadcast program of your choice (TA, NEWS, and INFO) from a different station. The function only works when you are listening to a preset FM RDS stations providing the data. To activate the Enhanced Other Networks function REMEMBER you must preset FM RDS stations to use the function. There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. How the Enhanced Other Networks function actually works: CASE 1 If there is no station broadcasting the program you have selected The unit continues tuning in the current station. When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing. When the program is over, the unit goes back to the previously tuned station, but the function still remains activated. CASE 2 If there is a station broadcasting the program you have selected The unit tunes in the program. The indicator of received PTY code starts flashing. When the program is over, the unit goes back to the previously tuned station, but the function still remains activated. CASE 3 If the FM station you are listening to is broadcasting the program you have selected The unit continues to receive the station but the indicator of received PTY code starts flashing. [. . . ] Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the followings: --DO NOT wipe it with a hard cloth. --DO NOT wipe it with thinner or benzine. --DO NOT apply any volatile substance such as insecticides to it. --DO NOT allow any rubber or plastic to remain in contact with it for a long time. DO NOT use any solvent--such as conventional record cleaner, spray, thinner, or benzine--to clean the disc. Handling cassette tapes If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. [. . . ]