User manual JVC UX-VJ3P

[. . . ] Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. Den Netzstecker aus der Steckdose ziehen, um die Stromversorgung vollkommen zu unterbrechen. Der Schalter unterbrichet in keiner Stellung die Stromversorgung vollkommen. [. . . ] If a CD is already inserted, it will start playing from the first track. If no CD is inserted, "NO DISC" appears on the display and the CD Player remains in Stop mode. To Insert a CD 1. s Press the CD OPEN/CLOSE 0 button on the Unit (or the CD 0 button on the Remote Control. ) The CD cover opens. s To unload an 8 cm (3") CD, use the concavity to make removal easier. 2. s Place a CD, with its label side out as shown below. Press down on the CD's center until you hear a click. Basics of Using the CD Player-Normal Play 3. s Press the CD OPEN/CLOSE 0 button (or CD 0 button) again to close the CD cover. · To close the CD cover and play the CD, you can just press the CD #¥8 button. You can place an 8 cm (3'') CD without an adaptor. If the CD cannot be read correctly (because it is scratched, for example), " 0 0:00" appears on the display. You can insert a CD while listening to the other source. To Play a CD-------------------------- 1. s Press the CD #¥8 button. The first track of the CD begins playing. s s s Track number Playback time CAUTIONS: · DO NOT try to open or close the CD cover by hands as it will be damaged. · · The track number that has already played disappears from the music calendar. The CD Player automatically stops when the last track of the CD has finished playing. 10 Total track number Total playback time 8. s Press the CD #8 button. The tracks are played in random order. To skip a track during playback, press the ¢ button to jump to the next track in the random sequence. Press the 4 button to jump back to the start of a track being played. To exit Random Play mode, while the CD Player is stopped, press the RANDOM button to light off the "CD RANDOM" indicator and carry out Normal Play, or press the CD 0 button to open the CD cover. 5. s Press the UP, DOWN, >, or < button to select the track to program. UP or > button: Increases the track number by 1. DOWN or < button: Decreases the track number by 1. · When the > or < button is kept pressed, the track number changes rapidly. Repeating Tracks You can set the program or individual track playing to repeat as many times as you like. Press the REPEAT button on the Remote Control. The Repeat indicator changes with each press of the button, as shown below. = ALL =blank display = (back to the beginning) : Repeats one track. ALL : In Normal Play mode, repeats all the tracks. [. . . ] Take up the slack by inserting a pencil in one of the reels and rotating. Do not touch the tape surface. · CAUTION: Do not use any solvent (for example, conventional record cleaner, spray thinner, benzine, etc. ) to clean a CD. · General Notes In general, you will have the best performance by keeping your CDs and the mechanism clean. · Store CDs in their cases, and keep them in cabinets or on shelves. · Keep the system's CD cover closed when not in use. · Do not store the tape: - In dusty places - In direct sunlight or heat - In moist areas - On a TV or speaker - Near a magnet Cleaning the lens If the lens in the CD pickup is dirty, dropout, etc. , could degrade sound. [. . . ]