User manual JVC UX-VJ5W

[. . . ] Serial No. GVT0032-006A [E] Warnings, Cautions and Others / Warnung, Achtung und sonstige Hinweise / Mises en garde, prcautions et indications diverses / Waarschuwingen, voorzorgen en andere mededelingen / Avisos, precauciones y otras notas / Avvertenze e precauzioni da osservare Caution switch!Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off). The switch in any position does not disconnect the mains line. When the unit is on standby, the STANDBY/ON lamp lights red. [. . . ] When the band is set to FM again, the EON will be set to standby mode. the selected program type is being received from the broadcast station) and if the DISPLAY MODE or 4, button (or the </>/DOWN/UP button on the Remote Control) is operated, the station will not switch back to the current selected station even after the program ends. The program type indicator remains in the display, indicating that the EON is in standby mode. When the EON is in standby mode and a radio broadcast is being recorded, be careful because the EON may be activated and a different program than the intended one may be recorded. When the EON mode is not required, release the EON mode. When the alarm signal is detected by EON, the station broadcasting the alarm is received with priority. "ALARM" is not displayed. 3 Press the PTY/EON button on the Remote Control again within 10 seconds to set the selected program type. The selected program type indicator lights up on the display, and the Unit enters EON Standby mode. Case 1: If there is no station broadcasting the program type you have selected The broadcast station being currently heard will continue to be heard. CAUTION: When the sound alternated intermittently between the station tuned in by the EON function and the current selected station, cancel the EON mode. This does not constitute malfunction of the Unit. When a station starts broadcasting the program you have selected, this Unit automatically switches to the station. The program type (TA, NEWS or INFO) indicator starts flashing. When the program is over, this Unit goes back to the currently selected station, but still remains in EON Standby mode. 11 English Switching to a program type of your choice temporarily Case 2: If there is a station broadcasting the program type you have selected This Unit tunes to the station broadcasting the program. The program type (TA, NEWS or INFO) indicator starts flashing. English Using the CD Player COMPACT DIGITAL AUDIO VERTICAL DISC LOADING MECHANISM REMOTE CONTROL RM-RXUV5R DIMMER SLEEP CD Cover CD 0 REPEAT CANCEL UP > DOWN CD #8 7 MICRO COMPONENT SYSTEM UX-V30R DISPLAY FM MODE AUTO PRESET MD/AUX RANDOM PROGRAM SET < AHB PRO CD PROGRAM RANDOM REPEAT STANDBY/ON MD/ AUX AHB PRO VOLUME BASS TREBLE CANCEL REC TIMER REV MODE CLOCK UP SET DOWN PTY/EON DISPLAY MODE CD OPEN/CLOSE TAPE PHONES DOWN FM/AM CD MULTI CONTROL UP TAPE TUNER BAND CD 4 VOLUME CD OPEN/ CLOSE 0 CD #/8 Track number, Playing time, Program order number 7 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PROGRAM RANDOM ALL OVER Music calendar OVER indicator When the System is in use, the display shows other items as well. Play continues from the point where it was paused. 8 Press the CD #/8 button. The System plays the tracks in the order you have programed them. s You can skip to a particular program track by pressing the 4 or button (or the </>/DOWN/UP button on the Remote Control) during Program Play. s To stop playing, press the 7 button once. To confirm the programed tracks while the CD player is stopped, press the PROGRAM button; the tracks making up the program will successively be displayed in the programed order. To delete all the tracks in the program while the CD player is stopped, press the 7 button. Pressing the CD 0 button on the Remote Control (or the CD OPEN/CLOSE 0 button on the Unit) to open the CD cover will also clear the programed tracks. To exit from the program mode while the CD player is stopped, press the 7 button to light off the PROGRAM indicator. All the programed tracks will be cleared. Notes: If the total playback time of the programed tracks exceeds 99 minutes 59 seconds, "-- -- : -- --" appears on the display. If you try to program the 21st track, "FULL" appears on the display for about 2 seconds. Selecting a track During playback, press the 4 or button (or the </>/DOWN/ UP button on the Remote Control) to select the track you want. Press the button (or the >/UP button on the Remote Control) once to skip to the beginning of the next track. [. . . ] Store CDs in their cases, and keep them in cabinets or on shelves. Keep the system's CD cover closed when not in use. Do not store the tape: - In dusty places - In direct sunlight or heat - In moist areas - On a TV or speaker - Near a magnet Cleaning the Lens If the lens in the CD pickup is dirty, sound degradation may take place. Open the CD cover and clean the lens as shown. Use a blower (available from a camera store) to blow dust off the lens. [. . . ]