User manual JVC VN-C205

[. . . ] FIXED DOME NETWORK CAMERA VN-C205 INSTRUCTIONS For Customer Use: Enter below the Serial No. Retain this information for future reference. VN-C205 LWT0280-001A Safety Precautions FOR USA AND CANADA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] Adjust the zoom ratio of the lens such that the object for which motion is to be detected is at least the size of multiple blocks. Cautions Flickering lights may cause false detections in motion when the camera is connected. When brightness varies due to the use of the auto iris function or lighting conditions, this may be detected as motion. In this case, it is recommended that the detection time be set to a value other than "0". Note that the motion detection function is not designed to prevent theft or fire. It may not function properly under certain object or setting conditions. We shall not be responsible for any accident or losses incurred. 39 Settings (Step 2 Network Settings) 2-4 Other Settings Using the "VN-C205U Setup Tool" (4. Alarm Setting) This section describes procedures for alarm setting. Alarm Input · When there is an input of signals to the alarm input terminal on the ceiling mount. ( Page 18 "Alarm Input Terminal") · When motion is detected. ( Page 38 "Motion Detection Setting") Operation when an alarm input is activated · Output signals are sent from the alarm output terminal on the ceiling mount. ( Page 19 "Alarm Output Terminal") · Alarm packets are sent to the PC. ( Page 42 "Message Packet") · Images are uploaded to the FTP server. ( Page 50 "FTP Client Setting"). Start up the "VN-C205U Setup Tool" and select [Alarm]. 1 2 3 4 40 2. Click the [Other Triggers] tab on the [Alarm Setting] screen. 5 4 3. When setting is complete, click followed by . 4. Click the [Alarm Output] tab on the [Alarm Setting] screen. 6 7 4 5. When setting is complete, click followed by . 41 Settings (Step 2 Network Settings) 2-4 Other Settings Using the "VN-C205U Setup Tool" (4. Alarm Setting) (Continued) Alarm Input Item Alarm 1/Alarm 2 1 Mode Detect Mode Function/Set Value Initial Value This section describes setting procedures for alarm input. -- Not Available For selecting whether to enable or disable the input signals. Set Values : Available, Not Available Make For selecting the method for detecting input signals. Make : Detect input signals at the "Make" contact point. Break : Detect input signals during "Break". [. . . ] Check the available hard disk space on your PC and delete unwanted files. Once the connection is activated, it cannot be canceled within a few seconds. A long time is required to cancel an action when the "Connecting . . . " message is displayed. Color is unsatisfactory. Check the color adjustments of the monitor and video card. Is the color setting of your PC screen set to High Color (16 bits) or lower? [. . . ]