User manual JVC VN-C625

[. . . ] DOME TYPE NETWORK CAMERA VN-C625 INSTRUCTIONS For Customer Use: Enter below the Serial No. Retain this information for future reference. VN-C625 LWT0248-001A Safety Precautions FOR USA AND CANADA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] (Set value: 0 to 65535) If "Disconnect every time" is selected, connection with the FTP server will be cut off upon uploading of each image. Error recovery (Connection error) Specify a recovery action when an error occurred with the TCP connection or FTP verification of VN-C625. Retry forever : Recovery attempt is repeated until the power for VN-C625 is turned off. Retry : Recovery attempt is repeated for a specified duration. Set value (*) 1 to 600 mins (Transfer error) Specify a recovery action upon occurrence of a file transfer error while uploading the images. Disable FTP : Disable the FTP function automatically. Note To resume operation, set 1 [Continous FTP] to "Available". 0 5 6 Filename *. jpg : Check this item to upload file with the name that appears in the position indicated as " * ". Note Files are always overwritten with the latest ones and therefore only 1 image file will be stored in the FTP server. 7 Timestamp : Upload the time of the internal clock in VN-C625 as the file name. 8 Notes Ensure to set to the correct time on the Time Setting screen. All image files uploaded are stored in the FTP server. 9 ! Alarm FTP Upload Setting Specify the method for uploading still images via the alarm FTP. Upload Interval : Set the time interval for uploading JPEG images to the FTP server when there is an alarm input. Set value: 0 to 60 seconds Before trigger : Set the time interval for uploading images before an alarm input. Set value: 0 to 5 seconds before trigger After trigger : Set the time interval for uploading images after an alarm input. Set value: 0 to 60 seconds after trigger 51 Settings (Step 2 Network Settings) 2-4 Other Settings Using the "VN-C625U Setup Tool" (11. Start up the "VN-C625U Setup Tool" and select [B & W]. The [Black & White] screen will be displayed. 1 2 3 4 Click . The [Trigger Setting] screen will be displayed. Set the [Time Trigger] for switching the Black & White mode at the specified time. Time1/Time2 Mode Black and White : Switches to the Black & White mode upon reaching the specified time. Color Auto : Switches to the Color mode upon reaching the specified time. : Switches automatically between the Black & White and Color modes according to the brightness upon reaching the specified time. <Trigger Setting Screen> Time Time at which the selected "Mode" will be activated. 2. When all the settings have been completed, click 52 to end. 1 Mode For setting the function on switching from Color to Black & White mode. Black & White : Black & White mode at all times. Color : Do not switch to the Black & White mode. Auto : Switches automatically to the Color mode when brightness level of the object is high, and to the Black & White mode when brightness level of the object is low. 3 One Push AF For setting whether to adjust focus automatically when switching between the Color / Black & White modes. OFF : Turn off auto focus function. Note When in the Black & White mode, this camera is sensitive to both visible and near-IR light. As such, images may become out of focus upon switching from the Color to Black & White mode, depending on the type of light source used. When this occurs, adjust the focus again in the Black & White mode. Note To ensure switching between the Black & White / Color modes Switching between Black & White / Color may be performed according to the brightness of the object when the mode is set to Auto. [. . . ] Image size and quality changes automatically. White Balance is automatically adjusted when it is set to AWC. Adjustment will take about 15 seconds, during which setting of image quality is not possible. When a VN-C625 is connected to multiple PCs, priority will be given to the PC for which VN-C625 operation /setting is last performed. When the network is loaded with frequent broadcasting or collisions, connection may not be established or may be cut off when errors occur with the network. [. . . ]