User manual JVC VR-616

[. . . ] DIGITAL VIDEO RECORDER VR-616 INSTRUCTIONS For Customer Use: Enter below the serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No: Thank you for purchasing this JVC product. [. . . ] When you press twice the PLAY/Reverse Playback button under shifting, the image changes immediately. When in the Pause mode, turn this to enable single picture playback. When the rotation direction is changed in the middle of operation, a reaction is overdue or the recorded picture is skipped. When the DVR is in PLAY MODE, the buttons have the functions indicated above button mark. (REC, stop ( ) / pause( ll ) / reverse play ( )/ pause ( ll )/ play ()) When the DVR is in menu mode, the buttons have the functions indicated below. In the play mode if you press the Enter button the DVR will be paused, then you can search field by field using the jog/shuttle control. You can search quickly using the Shuttle and slowly by using the Jog. JOG 4. 1. 5 Menu Setup You can easily change the Camera Setup, Recording Setup, and Audio Setup by the graphical user interface screen. If you press the menu button, you can see the next menu screen. It can be moved up and down by using Jog. The Menu is selected by clicking the ENTER button. Setup value (symbols, Alphabet Upper case (Capital) letters, lower case letters, numbers and position) of the menu can be changed by using X & Y axis /EXIT/ENTER buttons, and INPUT button. 4. 1. 6 FREEZE By pressing the freeze button then pressing the channel buttons(1~16), the selected screen will display a still image. As pressing a Freeze button, changes Freeze LED ON and OFF. Pressing Camera Selection button (its LED is ON) in the state of Freeze LED is ON, it displays freeze screen. It is displayed "FZ" on screen, and blinked the LED of the Camera Selection button. For canceling, press the blinked Camera Selection button again. -- 37 -- JVC VR-616 4. 1. 7 Explanation of Image Sequence and Triplex IMAGE SEQUENCE : One playback channel is replayed to the divided screen field by field in sequence. Press the display button to select the type of display division. Image Sequence Playback Screen of 16 Channel TRIPLEX : This is an overlay (picture in picture) screen. You can monitor live screen and playback screen at the same time. It is returned to playback screen as pressing the PLAY button (ENTER button) after setup monitoring channel you want to see. If you want to change playback screen, press the Channel Selection buttons. TRIPLEX Playback Screen -- 38 -- JVC VR-616 5. Main Menu Camera Control, Camera Details, Pan / Tilt model. set-up Manual Recording, Schedule, Alarm Recording. set-up Alarm Name, Alarm Link. Select 8 screen group which is displayed when you press the "User" button. set-up Audio. set-up Main Menu. System Log, Alarm Log, HDD Management Backup Auto Select Video Output Administration About System. ! Possible to change setting value by using Jog and direction buttons. According to cursor position, cursor should move right/left when press up/down buttons. -- 39 -- JVC VR-616 5. 1 Camera Setup It is possible to set-up image which will connect at input port and able to set-up Pan/Tilt camera which will connect with RS-485. ! A camera title and image adjustment can be set-up to all channels regardless of a Pan/ Tilt camera. 5. 1. 1 Camera Control Please use Recommended Cameras. 1) RS-485 enables long distance transfer. [. . . ] For ending camera control, press an EXIT button. SCREEN Button : This button changes display mode to the various configurations available. The button that is printed "U" is a User button. ! CAUTION Risk of explosion if remote controller's battery is replaced by an incorrect type. Size : AAA size, Rating : DC 1. 5V For using remote controller after restarting DVR, operate again from the start. ! -- 95 -- JVC VR-616 Working Range of Remote Controller Signal Receiver Within 6m 30° Supports to use as below. ( Standard DVR receiver) · Distance : within 6m Angle : within 30° 30° ! Do not leave any material near the signal receiver between remote controller and DVR. [. . . ]