User manual JVC VR-616U/E

[. . . ] DIGITAL VIDEO RECORDER VR-616 INSTRUCTIONS A For Customer Use: Enter below the serial No. which is located on the bottom of cabinet. Retain this information for future reference. Model No: Thank you for purchasing this JVC product. [. . . ] (The channel number can be changed by pressing the INPUT button. ) 2) Selects contents which you want to change by jog. 3) Possible to change setup status by using the buttons as follows. ENTER button : Change and complete selected contents. Jog : Can change character and number by jog rotation. 4) To return to the preset menu, press the EXIT button. * If a Pan/Tilt camera is connected, test after setting-up the camera ID. -- 42 -- VR-616 5. 1. 2. 2 Camera Name Create an alphanumeric nickname of up to 16 characters (including symbols) as shown below. Turn the Jog to see the next character repeatedly. Character Mark Blank !" # $ % & ' ( ) " + , - . @ABCDEFGHIJKLMNOPQRSTUVWXYZ [ ] ^ _` a b c d e f g h I j k l m n o p q r s t u v w x y z { | } ~ How to Use 1) 2) 3) 4) !Select Name using the up/down buttons or Jog. Writes and amends using the left/right button and Jog. Press the ENTER button to complete. It is NOT possible to display all the characters when the screen is divided into more than 6 pictures. In this case ". . . " will be displayed. 5. 1. 2. 3 Pan/Tilt Camera Setup Camera Setting : Camera ID, Reverse Pan, Reverse Tilt, Control Test 1) Camera ID : For controlling the Pan/Tilt camera. Setting ID is for distinguish the Pan/Tilt camera, which is connected in parallel. (Be sure to check the specifications of the Pan/Tilt cameras. ) 2) Reverse Pan, Reverse Tilt : It reverses a Pan/Tilt Camera direction. Usually, the Pan/Tilt direction can be changed depending on the location and mounting of the Pan/Tilt camera. 3) Control Test : Possible to test whether Pan/Tilt Camera setup is correct or not. Useful when checking after setup finishes. ! For the control No. , set to the value same as the ID that has been set at the Pan/Tilt camera. -- 43 -- VR-616 5. 1. 2. 4 Adjustment Possible to adjust each input video color ( Brightness, Contrast, Saturation ) value as a number 0~100 and Hue can be adjusted as a number -128~127. Please, adju st a proper value for a background checking screen. How to Setup 1) 2) 3) 4) Move to the desired position using Jog or up/down buttons. Press the ENTER button to display the next image with video input. Turn the Jog (or press up/down buttons) to change the value. [. . . ] For ending camera control, press an EXIT button. SCREEN Button : This button changes display mode to the various configurations available. The button that is printed "U" is a User button. -- 95 -- VR-616 Working Range of Remote Controller Signal Receiver Within 6m 30° Supports to use as below. ( Standard DVR receiver) · Distance : within 6m Angle : within 30° 30° ! Do not leave any material near the signal receiver between remote controller and DVR. Remote controller could not be controlled as closing direct light or strong lighting. [. . . ]