User manual JVC WB-S623U

[. . . ] Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. PORTABLE CART WARNING Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or adult, and (symbol provided by RETAC) serious damage to the appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. [. . . ] Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition. 8. 9. 18. For USA and CANADA WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Information for USA This device complies with Part 15 of the FCC Rules. Changes or modifications not approved by JVC could void the user's authority to operate the equipment. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equi-lateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR LE CANADA) This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. Due to design modification, data given in this instruction book are subject to possible change without prior notice. Precaution This equipment is intended for indoor use only. Do not use it outdoors or at places that are exposed to rain or moisture. Do not attach devices other than TK-C625U/E, TK-C655E, TKC676E, TK-C205(A)U/E, TK-C205VP(A)U/E, VN-C625U and VN-C655U to this mount/bracket. Install this mount/bracket horizontally. Do not install or use the unit in the following places. · In a place exposed to rain or moisture. · In a temperature outsside the operating temperature range (­10°C to 50°C (14°F to 122°F)). · In a place where corrosive gasses are generated. · In a place subject to vibration. When attaching VN-C625U, VN-C655U to this mount/bracket, please refer to the "INSTRUCTIONS" section of VN-C625U, VNC655U for procedures to install the converter unit. Please refer to the "INSTRUCTIONS" section of the camera in use for procedures to attach the camera. Installing the Converter Unit When using VN-C625U or VN-C655U, attach using the clamping bracket inside the top cover of the converter unit (supplied with the camera). Converter Unit Clamping Bracket Top cover Installation Procedures WB-S621U Pendant Mount 1. Make a hole in the ceiling. When a hole is not made in the ceiling Groove Reinforcement Angle To route cables through the ceiling, make a hole of in the ceiling. 30 mm ( 1 1/4) 2. Safety cable 2. Route the safety cable and other cables Route the safety cable and cables that is attached to the reinforcement angle through the pendant mount. When a hole is not made in the ceiling, route the cables through the groove of the pendant Mount. 1. Cable Cables 3. [. . . ] When a hole is not made in the ceiling, route the cables through the hole at one side of the Ceiling Bracket. Ensure that the Front mark on the camera mounting plate aligns with the Front mark on the camera. For TK-C625U/E and VN-C625U, attach the ceiling panel assembly to the camera mounting plate before installing the camera. Mounting Hole A : For TK-C655E, TK-C676E, VN-C655U, TK-C205(A)U/E and TK-C205VP(A)U/E Mounting Hole B : For TK-C625U/E and VN-C625U Mounting Hole B Camera Mounting plate Safety cable Mounting Hole A Mounting Hole B Front Mark When the camera mounting plate is removed. Mounting Hole A Ceiling Panel Assembly Positioning Hole Specifications Operating temperature : ­10 °C to 50 °C (14 °F to 122 °F) Mass : Body : WB-S621U; 2. 0 k, WB-S622U; 1. 8 k WB-S623U; 1. 0 k Ceiling Panel Assy : 37. 4 (Same for WB-S621U, WB-S622U and WB-S623U) WB-S621U WB-S622U 332(13 1/8) 80(3 1/8) 85(3 3/8) Accessories (Same for WB-S621U, WB-S622U and WB-S623U) · Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]