User manual JVC WB-S625U INSTALLATION MANUAL

[. . . ] Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. PORTABLE CART WARNING Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or (symbol provided by RETAC) adult, and serious damage to the appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. [. . . ] Follow all warnings and instructions marked on the appliance. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Never push objects of any kind into his appliance through cabinet slots as they mat touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance. Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Unplug his appliance from the wall outlet and refer servicing to qualified service personnel under following conditions: a. When the power cord or plug is damaged or frayed. If liquid has been spilled into the appliance. If the appliance has been exposed to rain or water. If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation. If the appliance has been dropped or the cabinet has been damaged. When the appliance exhibits a distinct change in performance - this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition. 8. 9. 18. For USA and CANADA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Information for USA This device complies with Part 15 of the FCC Rules. Changes or modifications not approved by JVC could void the user's authority to operate the equipment. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equi-lateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. INFORMATION (FOR CANADA) RENSEIGNEMENT (POUR LE CANADA) This Class [B] digital apparatus complies with Canadian ICES-003. [. . . ] When attaching, align the FRONT mark (·) of the ceiling mount with the & mark of the Ceiling Recessed Bracket. 7. Front Mark (·) 8. Ceiling mount Attach the camera to the Ceiling mount. Perform the necessary camera settings before attaching. For details, please refer to the "INSTRUCTIONS" section of the camera in use. Mounting screws (4 locations) 9. Attach the Ceiling Panel. Refer to "Attaching a Ceiling Panel" on the next page. Attaching a Ceiling Panel Hooks (2 locations) Attach the ceiling panel (supplied) to the 2 hooks on the Ceiling Recessed Bracket. Ceiling Ceiling Panel Camera Removing a Ceiling Recessed Bracket 1. Hooks (2 locations) 1. 2. Remove the Ceiling Panel. Pull down the Ceiling Panel and disengage the 2 hooks either side. Dismount the camera unit from the Ceiling Recessed Bracket. To dismount, reverse the procedures for "Attaching the Camera" in the camera's "INSTRUCTIONS" section. 3. Ceiling Panel Dismount the Ceiling Recessed Bracket from the ceiling. 1 Loosen the clamping screws (3 locations) while supporting the Ceiling Recessed Bracket. [. . . ]