User manual JVC XL-V1

[. . . ] DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. Do not remove screws, covers or cabinet. [. . . ] The illustration on the next page indicates a typical connection with a CD player and an amplifier. · Use the correct type of batteries. Batteries that look similar may differ in voltage. · Always replace both batteries at the same time. · Do not expose batteries to heat or flame. 5 Turn the power off to all components before connections. To a wall outlet ANALOG IN OUT L R L R COAXIAL OUT OPTICAL IN OUT XL-V1SL Disconnect the protective plug(s) before inserting the optical cord(s). LINE OUT L R OUT OPTICAL CD Player A B C L R OUT -AUX- IN L R L R TUNER CD L R L R OUT-TAPE-IN L R COAXIAL OPTICAL IN IN Amplifier Illustrations of the input/output terminals above are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among the components. CAUTION: Before plugging the unit into an AC outlet, make sure that all connections have been completed. 6 English Playing Back a Disc English This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote control if they have the similar names (or marks) as those on the front panel. If operations using the remote control are different from those using the front panel, they are then explained. 4/1 ¢/¡ Disc tray 23 REC PAUSE REC LEVEL REC 7 PROGRAM SET CLEAR COMPACT DISC RECORDER XL-V1 REPEAT AUTO TRACK FINALIZE POWER _ON/ --OFF RANDOM DISPLAY REC SOURCE DIGITAL ERASE SYNCHRO MIN MAX 1 DISPLAY REPEAT 8 This unit has been designed to play back the following discs: · Audio CD (CD) · CD Recordable (CD-R) -- both finalized and unfinalized discs · CD Rewritable (CD-RW) -- both finalized and unfinalized discs 3 Start Playback Press 3. The disc tray automatically closes ("CLOSE" flashes on the display), and the unit starts reading the disc information recorded on the disc ("TOC READ" flashes), then starts playback -- Normal Play. (See also notes below. ) 1 Turn On the Power Press POWER to set it to the _ ON position. The display illuminates. POWER _ON/ --OFF Remote NOT If a disc is already loaded, the total track number and the total playing time appear. 2 Load a Disc 1 Press 0 to open the disc tray. Notes: 2 Insert a disc -- CD, CD-R or CD-RW. · If you have loaded a CD-R, the CD-R indicator lights up. Press PROGRAM so that the unit enters program mode. PROGRAM To confirm the program contents Before playing, you can check the program contents by pressing PROGRAM repeatedly. The programed tracks will be shown on the display in the programed order. 3 Press ¢ / ¡ (or 4 / 1) to select a track, then press PROGRAM again. Track number Step number in the program ("C" stands for "Confirm. ") PROGRAM Ex. : Track 3 is stored into program step 1. 4 5 Repeat the above step to program other tracks. Press 3. The tracks are played in the order you have programed. To stop playing, press 7. 9 To modify the program While confirming, you can change the track numbers in the program. Example: To change the track number (from "18" to "6") programed in program step 4 1 Press PROGRAM repeatedly until the contents of program step 4 appears on the display. PROGRAM Playing at Random -- Random Play The tracks will play at random. 1 Load a disc. · If the unit is in program play mode (the PROGRAM indicator is lit on the display), you cannot go to the next step. If this happens, press 7 to exit from program play mode. 2 2 Press ¢ / ¡ (or 4 / 1) to select a new track number, then press PROGRAM again. Press RANDOM so that the unit enters random mode. RANDOM The RANDOM indicator lights up on the display. The tracks are played at random. · If you want to erase the track from your program, press CLEAR. (In this case, you can see no change on display. ) To add tracks in the program before playing, press PROGRAM repeatedly until the unit enters program play mode. ("­ ­" under the TRACK indicator will start flashing on the display), then select the track numbers by following step 3 of the programming procedure (on the previous page). Random play ends when all the tracks are played once. To skip the currently playing track, press ¢ / ¡ (or 4 / 1). · You cannot go back to the previous tracks during random play even if you press 4 / 1. · Random play mode is also canceled when you press 0. [. . . ] If such a disc is used, this unit may reject the disc. To remove these rough spots, rub the edges with a pencil or ballpoint pen, etc. 16 English Troubleshooting English If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Unrecorded CD-R or CD-RW has been loaded. [. . . ]