User manual JVC XM-R70

[. . . ] PORTABLE MINIDISC RECORDER XM-R70SL/BK INSTRUCTIONS LVT0335-004A [B] CAUTION!USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] (By adding the track number in this way, you can edit the recording contents later using the edit functions, such as erase, move, and join. Also, you can quickly locate the desired track using the fast forward or reverse button. ) 7 SYNCHRO Recording (SYNCHRO) The synchro recording automatically starts when an input signal is given and ends if no signal condition continues for 30 seconds. 1 2 3 4 5 Insert an MD with its label side facing up. Slide the REC button. "SYNCHRO REC ON" appears and the "SYNC" indicator lights up on the display. Then, the disc mark blinks. Press the 6 button. The "SYNC" indicator blinks, indicating that the unit enters Rec/Standby mode. Play the recording source. When an input signal is detected by the unit, recording automatically starts. The recording will automatically end if no signal condition continues for 30 seconds. Note Once the 6 button is pressed during the SYNCHRO recording, the unit enters Rec/Pause mode and the SYNCHRO recording is disabled. To restart the SYNCHRO recording, repeat the above steps. Editing the MD (Using the unit) In addition to its recording and play functions, the unit comes with editing functions. You can divide, join, move, or erase the recorded tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the tracks in the MD. Note that you cannot edit the MD in Random Play mode. Dividing tracks (DIVIDE function) This involves adding a track mark (see Note) at some point during the track which is to be made into the start of an additional track so that the original track is divided into two tracks. Track No. Track A Track B Track C Track D Erasing tracks (ERASE function) This enables unnecessary tracks. The erased parts do not remain as silences but are closed up by the subsequent tracks. Track No. DIVIDE Erasing Track B Track A Track B Track C Track D Track A Track C Track D be recorded. Track A Track B Track C Track D New tracks can Joining tracks (JOIN function) This involves erasing a track mark and turning two adjoining tracks into one track. Track No. Track A Track B Track C Track D Erasing all the tracks (ALL ERASE function) All the tracks can be erased at once without recording fresh material over them. Track No. JOIN ALL ERASE Track A Track B Track C Track D Track A + Track B Track C Track D New tracks can be recorded. Moving tracks (MOVE function) Tracks can be moved around so that they are in the desired sequence. Track No. Giving titles to (TITLE function) discs and tracks Track A Track B Track C Track D A title consisting of up to 64 characters can be given to a disc and a track. The title given appears in the display window. MOVE Note Track A Track C Track D Track B Track marks: These marks are provided to locate the start of each track. Whatever lies between one track mark and the next is considered to a track and the numbers of the tracks (called "track numbers") are displayed in the sequence in which they are to be played. 8 Dividing Tracks (DIVIDE Function) Use the unit to carry out this function. 1 2 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "DIVIDE?" is displayed. Press the SET button and then press the 6 button. JOG dial Playing time Track to be divided 3 4 Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be divided. Press the SET button at the point where the track is to be divided. · The recording lasting for 4 seconds starting where the track was divided is repeatedly played for your reference. · Movement is possible within the POSITION-128 to +128 range (about 8 seconds before or after the position). To move the point, turn the JOG dial while listening the music. 5 Press the EDIT/ENTER button. "COMPLETE" and "TOC" appear, indicating successful recording. · The selected track is divided into two tracks and the track number will increase by 1. · When you turn off the power by pressing the 7/CHARGE button, "UTOC Writing" will be displayed and the edited contents are written. (The "TOC" indicator goes out. ) To cancel the operation, press the 7/CHARGE button in step 1 through 4 until the display returns to the original display. Joining Tracks (JOIN Function) Use the unit to carry out this function. 1 2 In Stop mode, press the EDIT/ENTER button and turn the JOG dial until "JOIN?" is displayed. [. . . ] · Susceptible to high levels of humidity or dust. · Directly exposed to heat from a heating appliance. · On top of a car dashboard or near the rear window. Handling the MDs · Do not open the shutter. [. . . ]