User manual JVC XV-N30

[. . . ] DVD VIDEO PLAYER XV-N30BK/XV-N33SL Before operation 2 Preparations 3 Basic operations 6 Advanced operations 11 MP3 disc playback 19 Changing the initial settings 21 Additional information VIDEO 26 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No GNT0024-017A [UJ] Warnings, Cautions and Others CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. [. . . ] At the top left of the screen, the information for the current magnification appears for about 5 seconds. Each time you press ZOOM, the magnification is doubled (up to 64 times). [NORMAL]: for watching TV in a general room. [CINEMA]: for watching a movie software in a room with suppressed light. [USER 1] [USER 2]: you can adjust parameters that affect the picture character and store the settings as a user preset. See the next step. 3 To define a user setting, press 5/ to select a parameter to be edited from the following. · GAMMA Adjust this if the neutral color is bright or dark. The brightness of dark and bright portion is maintained. Available range: ­4 (darkest) to +4 (brightest) · BRIGHTNESS Adjust this if the picture is bright or dark on the whole. Available range: ­16 (darkest) to +16 (brightest) · CONTRAST Adjust this if the far and near position is unnatural. Available range: ­16 to +16 · SATURATION Adjust this if the picture is whitish or blackish. Available range: ­16 (blackest) to +16 (whitest) · TINT Adjust this if the appearance of flesh tone is unnatural. Available range: ­16 to +16 · SHARPNESS Adjust this if the picture is indistinct. Available range: 0 to +3 · Y DELAY Adjust this if the picture looks separately/overlapped. Available range: ­2 to +2 ZOOM x 4 When a picture of a DVD VIDEO disc is viewed on a normal TV screen (4:3, Letter Box), black bars may appear at the top and bottom of the screen. In this case, if you select the "ZOOM × 1. 8" mode, the black bars become almost invisible. When a 1:2. 35 or 1:1. 85 DVD VIDEO source is played back, however, the black bars are visible on the screen. 2 Press 5//2/3 to move the zoomed position. To return to the normal playback Press ENTER. NOTE While zoomed, the picture may look coarse. 4 Press ENTER. A window for setting parameters appears. To adjust the picture character (VFP) SATURATION +4 Selected parameter The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences. 5 6 1 Press 5/ to adjust the level of the parameter. The higher value enhances the effect. During playback, press VFP. The VFP mode selection window appears on the TV screen. Press ENTER. Repeat steps 3 to 6 if you want to set other parameters. 16 Advanced operations To dismiss the VFP mode selection window Press VFP. Menu bar functions To bring up the menu bar NOTES · The window for VFP mode selection and parameter setting disappear if no operation is made for about 10 seconds. · While zoomed, the VFP function cannot be used. 1 2 When a disc is inserted, press ON SCREEN. A status bar for the type of disc inserted will appear on the TV screen. See page 8 for details about the status bar. To simulate surround sound (3D PHONIC) Press ON SCREEN again. A menu bar for the type of disc inserted will appear under the status bar. (for DVD VIDEO) 8. 5Mbps OFF CHAP. Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. 1 2 During playback, press 3D PHONIC. The 3D PHONIC window appears on the TV screen. TITLE 33 CHAP 33 1/3 1/5 TOTAL 1:25:58 1/3 Press 2/3 to select the desired mode. Each time you press the button, the 3D PHONIC mode changes as follows: (for SVCD) TRACK 33 OFF PROG. ST1 TIME -/4 25:58 ACTION DRAMA THEATER NONE (for Video CD) TRACK 33 TIME 25:58 ACTION +45 OFF PROG. RND. ST Selected effect mode · ACTION Suitable for action movies and sports programs in which the sound source moves. · THEATER You can enjoy sound effects like in a theater. (for Audio CD) TRACK 33 OFF PROG. RND. TIME 25:58 To dismiss the menu bar and status bar Press ON SCREEN. 3 Press 5/ to adjust the effect level. You can set the effect level from [1] to [5]. The higher value enhances the effect. Basic operation procedure 1 2 Press 2/3 to select the icon you want to work with. The selected icon is pointed by . To dismiss the 3D PHONIC window Press 3D PHONIC. Press ENTER. With many icons, an appropriate pull-down window appears, however, there are some exceptions. NOTES · The 3D PHONIC window disappears if no operation is made for about 10 seconds. [. . . ] All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 537-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. [. . . ]