User manual JVC XVN330BUS-XV-N330 Instruction Manual

[. . . ] DVD PLAYER XV-N330B XV-N332S Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. Do not remove screws, covers or cabinet. Do not expose this appliance to rain or moisture. The mains plug shall remain readily operable. [. . . ] You can adjust parameters that affect the picture character and store the settings as a user preset. See below. ANGLE SUBTITLE SLIDE EFFECT ZOOM ANGLE SUBTITLE SLIDE EFFECT ZOOM Using the disc menu You can operate a disc--SVCD/ VCD with Playback Control* (PBC)--using the disc menu shown on the TV screen. * A method of controlling disc play for SVCD/VCD by using the disc menu. Main display · Each indicator lights up when corresponding function/mode is activated, or corresponding information is on the main display. USER1 USER2 Zooming the picture Each time you press ZOOM, the magnification changes. · You can use 5//2/3 button to move the zoomed position. To return to the normal playback, select the normal size by pressing ZOOM repeatedly. Menu bar functions selects the time mode shown in the display window and the status bar. · TOTAL: Elapsed time of current title (DVD) or a disc (CD/VCD/SVCD) · T. REM: Remaining time of current title (DVD) or a disc (CD/VCD/SVCD) (Except for DVD: while stopped, disc total time) · TIME: Elapsed time of current chapter (DVD) or track (CD/VCD/SVCD) · REM: Remaining time of current chapter (DVD) or track (CD/VCD/SVCD) (while stopped, current track total time) selects repeat mode. DVD: During playback CD: In any condition VCD/SVCD: In any condition except PBC playback · CHAPTER: Current chapter repeat (DVD) · TITLE: Current title repeat (DVD) · TRACK: Current track repeat (CD/VCD/SVCD) · ALL: All track repeat (CD/VCD/SVCD) · A-B: A-B repeat (During playback). After selecting A-B, press ENTER at the beginning point of repeat, then press ENTER again at the end point. About On-screen guide icons : Playback. / / : Slow-motion playback with the current speed. : Fast forward/backward playback with the current speed. When playing a disc with low quality recording conditions or scratches If the disc is poorly recorded or the disc is of poor quality, there may be problems with playback or discs cannot be played back at all. TRACK ADJUST function allows you to play back such discs with better quality. Each time you press TRACK ADJUST, the mode of the function appears on the TV screen and changes as follows: TRACK ADJUST OFF = TRACK ADJUST MODE 1 = TRACK ADJUST MODE 2 Select TRACK ADJUST MODE 1 or MODE 2 which gives you better results. To return to the normal playback mode, select TRACK ADJUST OFF. · Opening the disc tray will set the function to off. · This function is not available for some discs. · If the disc cannot be played back, try to set the TRACK ADJUST mode before you close the tray. : At the beginning of a scene containing multiangle views. : At the beginning of a scene containing multiaudio sounds. : At the beginning of a scene containing multisubtitles. You can change the setting so that the on-screen guide icons do not appear on the TV screen. (See "ON SCREEN GUIDE" in "Initial settings. ") VARI-PLAY (For DVD Video) (variable You can change the playback speed playback) with the sound (except for DTS) and subtitles. To playback 1. 2 or 1. 5 times faster, press VARI-PLAY on the player or ¡ on the remote control. To playback 0. 8 or 0. 6 times slower, press ¡ on the remote control while playback is paused. [. . . ] Activate or deactivate the on-screen guide. Set the time until the player turns off (into standby) automatically if playback is stopped for more than 30 minutes or 60 minutes. Group column Current group Current playback mode File column SCREEN SAVER BACKGROUND Press 5//2/3 to move the cursor bar to a desired file, then press 3(SELECT). · When you press ENTER, only the selected file is played back (except for MP3 files). ON SCREEN GUIDE AUTO STANDBY 9 10 11 12 Troubleshooting Power Power does not come on. \ Power plug is not inserted securely. Plug in securely. Language codes list for the LANGUAGE menu No picture is displayed on the TV screen or the screen is blurred or divided into two parts. \ The player is in the progressive scanning mode though it is connected to a TV via the VIDEO or S-VIDEO jack. [. . . ]