User manual JVC XV-N422S

[. . . ] DVD PLAYER XV-N420B XV-N422S Warnings, Cautions and Others INSTRUCTIONS ® VIDEO GNT0060-004C[EK] EN 1005MOC-MW-SC ©2005 Victor Company of Japan, Limited Region code of DVD VIDEO This player can play back DVD VIDEO discs whose region code numbers include "2. " Examples of playable DVD VIDEO discs: CAUTION: · Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc. , the heat may not be able to get out. ) · Do not place any naked flame sources, such as lighted candles, on the apparatus. · When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly. · Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] · The player supports the DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less (25 fps). Random playback How to set the Initial settings 1 2 3 4 5 Press SET UP. Press 5/ to select the options, then press ENTER. To dismiss a preference display Press SET UP. 1. While stopped, press 5//2/3 to move the cursor bar to playback mode. Press ENTER repeatedly to select RANDOM. Press 3 to move the cursor bar to the file column, then press 3(SELECT). While stopped, press 5//2/3 to move the cursor bar to playback mode. Press ENTER repeatedly to select PROGRAM. Press 5//2/3 to select the desired file, then press ENTER. Repeat step 3 until all the desired files are selected. · To erase the last programmed file, press 2 to move the cursor bar to the programmed files column, then press CANCEL. Press 3(SELECT). Program playback NOTES · Some items in the menus cannot be changed during playback. · During MP3 files playback, you cannot show the menus. · If the upper and lower parts of the menu are cut off, adjust the picture size control of the TV. · For settings of the LANGUAGE menu or the PARENTAL LOCK menu, see also "Language codes" below. · Depending on the disc, the settings may not apply correctly. AUDIO menu Item Contents DIGITAL AUDIO OUTPUT Set this item correctly according to the logo on your receiver or decoder. [PCM ONLY]: Receiver/decoder bearing neither Dolby Digital nor DTS logo, or digital recorder. [DOLBY DIGITAL/PCM]: Receiver/decoder bearing Dolby Digital logo and no DTS. [STREAM/PCM]: Receiver/decoder bearing both Dolby Digital and DTS logos. ANALOG DOWNMIX Set this item properly according to your analog audio connection to play the sound of the surround multichannel audio on a DVD VIDEO. [DOLBY SURROUND]: Select this when connecting to a surround decoder. [STEREO]: Select this when connecting to a stereo amplifier or TV, or in case you want to record from a DVD VIDEO to a MiniDisc, cassette, etc. [. . . ] Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. · "CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE `STANDARD DEFINITION' OUTPUT. [. . . ]