User manual JVC XVNP1SLC-XV-NP1 Instruction Manual

[. . . ] DVD PLAYER/MEMORY CARD READER XV-NP1SL Before operation 2 Preparations 3 Basic operations 8 Advanced operations 13 Audio/Video files playback 21 Changing the initial settings 26 Additional information 31 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Serial No LET0234-001A [J/UJ] Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION To reduce the risk of electrical shocks, fire, etc. : 1. [. . . ] · BRIGHTNESS Adjust this if the picture is bright or dark on the whole. Available range: ­16 (darkest) to +16 (brightest). · CONTRAST Adjust this if the far and near position is unnatural. · SATURATION Adjust this if the picture is whitish or blackish. Available range: ­16 (blackest) to +16 (whitest). · TINT Adjust this if the appearance of flesh tone is unnatural. · SHARPNESS Adjust this if the picture is indistinct. · Y DELAY Adjust this if the picture looks separately/overlapped. Available range: ­2 to +2. 2 Press 5//2/3 to move the zoomed position. To return to the normal playback Select the normal size by pressing ZOOM repeatedly. NOTE While zoomed, the picture may look coarse. To adjust the picture character (VFP) The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences. 1 During playback, press VFP - PROGRESSIVE SCAN. The VFP mode selection window appears on the TV screen. · If you press the VFP-PROGRESSIVE button too long, the button works for changing the scanning mode (see page 4) instead of the VFP function. 4 Press ENTER. A window for setting parameters appears. SATURATION +4 Selected parameter 5 6 Press 5/ to adjust the level of the parameter. The higher value enhances the effect for each item other than "GAMMA" and "SHARPNESS. " Press ENTER. Repeat steps 3 to 6 if you want to set other parameters. 18 Advanced operations To dismiss the VFP mode selection window Press VFP - PROGRESSIVE SCAN. Menu bar functions To bring up the menu bar NOTE The window for VFP mode selection and parameter setting disappear if no operation is made for about 10 seconds. 1 2 When a disc is inserted, press ON SCREEN. A status bar for the type of disc inserted will appear on the TV screen. See page 10 for details about the status bar. To change sound field (SOUND EFFECT) Press ON SCREEN again. A menu bar for the type of disc inserted will appear under the status bar. (for DVD VIDEO) 8. 5Mbps OFF CHAP. Using the Sound Effect function, you can change the sound field. 1 2 During playback, press SOUND EFFECT. The Sound Effect indication appears on the TV screen. Press SOUND EFFECT to select the desired mode. Each time you press the button, the Sound Effect mode changes as follows: TITLE 33 CHAP 33 1/3 1/5 TOTAL 1:25:58 1/3 (for SVCD) TRACK 33 TIME -/4 25:58 SOUND EFFECT:1 OFF SOUND EFFECT:2 OFF PROG. RND. ST1 SOUND EFFECT:3 (for Video CD) TRACK 33 OFF PROG. ST · As the value becomes bigger, the Sound Effect works stronger. TIME 25:58 Press SOUND EFFECT repeatedly until "OFF" appears on the TV screen. (for Audio CD) TRACK 33 OFF PROG. RND. TIME 25:58 NOTE The Sound Effect indication disappears if no operation is made for about few seconds. To dismiss the menu bar and status bar Press ON SCREEN. Basic operation procedure 1 2 Press 2/3 to select the icon you want to work with. The selected icon is pointed by . Press ENTER. With many icons, an appropriate pull-down window appears, however, there are some exceptions. NOTES · A mark or text on the menu icon for the function or mode currently selected is shown in green. · Some functions are not available during playback. (You cannot move to the associated icon when it is not available. ) 19 Advanced operations To deactivate the Sound Effect Advanced operations Menu bar functions for DVD VIDEO Time mode selection During playback, selects the time mode shown in the display window and in the status bar. Press ENTER to select the time mode from the following. · TOTAL: Current title elapsed time · T. REM: Current title remaining time · TIME: Current chapter elapsed time · REM: Current chapter remaining time Menu bar functions for SVCD/Video CD/ Audio CD Time mode selection Selects the time mode shown in the display window and in the status bar. Press ENTER to select the time mode from the following. · TIME: Current track elapsed time · REM: Current track remaining time (while in stop mode, current track total time) · TOTAL: Disc elapsed time · T. REM: Disc remaining time (while in stop mode, disc total time) Repeat mode (See also page 16) Selects the repeat mode during playback. Press 5/ to select the repeat mode from the following. · CHAPTER: Current chapter repeat · TITLE: Current title repeat · A-B: A-B repeat · OFF: Repeat mode deactivated 3. [. . . ] Not all DTS discs contain six (5. 1) channels of information. Dynamic range The difference between the loudest and softest sounds. Interlaced scanning In a conventional video system, a picture is shown on the display monitor in between lines of two halves. The Interlaced scanning system places lines of the second half of the picture in-between lines of the first half of the picture. [. . . ]