User manual JWIN JC-CD160 INSTRUCTION MANUAL

[. . . ] DISPLAY BUTTON (Set the Clock) Selects radio frequency or clock display. To set the clock: 1. With clock display selected, hold down the (CLK) button until clock display starts flashing. 2. Press (-) to change minutes, (+) to change hours. [. . . ] 5) menu5:ESP12--45 OPTION While ANTI-SKIP PROTECTION FUNCTION (ASP) If in use, the player is likely to receive shocks or vibrations. The ANTI-SHOCK FUNCTION is active to provide uninterrupted playback. Should the player receive shocks for more than 45 seconds continuously in cd playback playback, the sound will mute for a very short while and will resume once the player has stabilised from the shock. ESP45:Selected ESP time 45 seconds. 4. LOUDNESS BUTTON -Press this button to boost the bass and treble response. Push the button again to return to normal operation. This function is useful when listening at low levels. Loudspeakers are ineffici ent at low power levels and will tend to sound flat. The loudness control will boost the bass and treble response thus giving a more lively performance. While this function is operating, the display shows LUD. LCD DISPLAY -The liquid crystal display will display the current status of the unit. BAND SELECTOR SWITCH Press this switch to select the desired Radio band. Selection is made in regular sequence as FM-AM. AUTOMATIC OR MANUAL TUNING(FREQ UP>>OR FREQ DOWN<<) (A) RADIO MODE When pressed for less than 1 second, these keys operate as manual tuning mode. When pressed longer than 1 sec. , they are operated as SEEK tuning mode. (AUTO) (B) CD PLAYER MODE When pressed for less than 1 second, these keys operate as TRACK UP or TRACK DOWN. When pressed longer than 1 sec. , they will operate as CUE or REVIEW mode. -- 2 -- -- 3 -- REMOVING THE FRONT PANEL CD CONTROL LOCATION OF PARTS 17 19 18 Front Panel LUD C D / C D - R / C D - R W PLAYE R LUD Release Button PUSH SEL DISP RPT RDM SCAN ALL DIR SONG CLASSIC BND JAZZ MUT CLK MUSIC MUTE LOUD MONO AF PTY EON ST LOC LUD INSTALLING THE FRONT PANEL 60 WATT/DIGITAL TUNING SYSTEM SCN A/PS 1 LUD 2INT 3RPT 4RDM 5 6 MODE 20 21 22 23 17. CD EJECT BUTTON Press the EJECT button to remove the CD. The receiver will automatically switch to radio mode. 18. CD SLOT 19. TRACK/SEARCH BUTTON FORWARD AND REVERSE TRACK SEARCH Press the SKIP button or during play to go to the desired track(song). ( . . . . REVERSE)( . . . . FORWARD) Press and hold the SKIP button or during play to scan the disc at high speed. When the desired music section of the disc is found, release the button. Normal play will resume. 20. PAUSE BUTTON During PLAY , press button to PAUSE. Press it again to resume play. 21. INT BUTTON (Priview all Tracks) This feature allowes you to listen to the first 10 seconds of each track on the display . Press the key SCAN indicator appears on the LCD pannel. To cancel the function press the key again. 22. REPEAT BUTTON (RPT) To repeat the current track press the key. The RPT indicator appears on the LCD panel and the track be repeated continuously. [. . . ] Though not a normal occurrence, the microprocessor which controls the operation of this unit can be affected by electrostatic noise. This generally is indicated by such symptoms as no power being supplied when you switch the unit on, failure of buttons and controls, or an abnormal display. Should this happen, press the reset button with a thin, pointed object to reset the microprocessor. 1 2 3 1 6 7 4 2 3 5 1. [. . . ]