User manual JWIN JD-C3215

[. . . ] E ENGLISH 2-E Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] You can take an image using a flash mode suitable to your circumstances. Press the . 0007 T button repeatedly until the desired flash mode appears. Compose the image and press the shutter button. W If you will not be using the flash, turn it off. Turning the flash OFF will result in faster camera startup and faster operation because the capacitor will not be charged needlessly. Turning the flash OFF when not needed, will also improve battery life. User's Manual >> E-27 The camera has four flash modes: Automatic Flash, Red-Eye Reduction, Fill Flash (On), and Flash Off. The table below will help you choose the appropriate flash mode: Flash mode Icon Description Auto flash The flash fires automatically according to the ambient lighting conditions. Select this mode for general flash photography. Red-eye reduction The flash emits a precursor-flash before the main flash fires. This causes the pupil in the human eye to constrict, reducing the red-eye phenomenon. Select this mode when taking images of people and animals in low-light conditions. Fill flash The flash will always fire regardless of the surrounding brightness. Select this mode for recording images with high contrast (backlighting) and deep shadows. Select this mode when taking images in a place where flash photography is prohibited, or when the distance to the subject is beyond the effective range of the flash. 28-E Digital Camera >> PLAYBACK MODE In the mode, you can view, magnify, delete images, play video clips, or run a slide show. Playback mode also provides a thumbnail image display, allowing you to quickly search for the image you want. Viewing Images When you take a still image or movie, it is immediately stored in internal memory or on an SD memory card. Still images and movies in internal memory or on an SD memory card can be displayed on the LCD monitor. To view still images, follow the steps below: 1. The last still image taken is displayed. For movies, the first frame is displayed as a still image. Move to the still image you want to view using the / buttons. If you press the button, you can view the next still image or movie. If you press the button, you can view the previous still image or movie. 01/04 Images are played back from the following recording media: - When no memory card is loaded, it plays back from internal memory. [. . . ] If that occurs you may change the white balance setting by specifying a lighting condition (temperature) most appropriate for your scene. The ISO speed defines light sensitivity. The ISO higher the ISO number is, the more sensitive it is to light. When recording under dark situations or recording a fast-moving subject, use a high-number setting. [. . . ]