User manual JWIN JD-C4215

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] To exit from the menu mode, press again the [ ] menu button. Effective Subjects and Set Values Positive (+) Compensation * Copying of printed text (black characters on white paper) * Backlit portraits * Very bright scenes (such as snowfields) and highly reflective subjects * Shots made up predominantly of sky Negative (-) Compensation * Spot lighted subjects, particularly against dark backgrounds * Imaging of printed text (white characters on black paper) * Scenes with low reflectivity, such as shots of green or dark foliage 39 Setting the White Balance The human eye adapts to changes in light so that white objects still appear white even when the light changes. With cameras, however, the color of the subject is influenced by the color of the light surrounding it. This color adjustment is called "white balance adjustment". This setting allows you to set the white balance when taking images under specific lighting condition. Rotate the mode dial to one of [ M ] Manual mode, [ Av ] Aperture Priority mode, [ Tv ] Shutter Speed Priority or [ P ] Program mode. Select "WHITE BALANCE" by using the / button, then press the button. Change the setting with the / button and press again the button to confirm. To exit from the menu mode, press again the [ ] menu button. [ AUTO ]: [ DAYLIGHT ]: CLOUDY ]: [ [ SUNSET ]: [ TUNGSTEN ]: [ FLUORESCENT ]: automatically adjusting the white balance. recording for overcast, shaded, twilight or evening skies. for recording under tungsten lighting condition. for recording under fluorescent lighting condition. E F G S 40 Switching between Metering Modes Set the metering method to calculate the exposure. Rotate the mode dial to one of [ M ] Manual mode, [ Av ] Aperture Priority mode, [ Tv ] Shutter Speed Priority or [ P ] Program mode. Select "METERING" by using the / button, then press the button. Change the setting with the / button and press again the button to confirm. MULTI (The camera divides images into several zones for metering and evaluates the complex lighting conditions). SPOT (Meters the area within the spot automatic exposure point frame at the center of the LCD monitor). To exit from the menu mode, press again the [ ] menu button. Press the shutter button. 41 Replaying Single Image Replay Play back photographed still images one image at a time. Press the [ The last recorded image appears on the LCD monitor. View and select your recorded images by using the / button. [. . . ] [ [ NORMAL ] FINE ] F VIDEO COLOR Change the color of image to full color, vivid, black and white and sepia. G [ [ [ [ FULL COLOR ]: VIVID ]: BLACK & WHITE]: SEPIA]: Records Records Records Records the the the the image in full colors. image in sepia tones. S 68 Setup Menu This feature allows you to set up the default settings for using you camera in addition to image-related settings. You can select your personal preferences for the camera by this mode. Navigate the options you wish to configure by using the You may press the / button and then the button to enter the sub-menu. [. . . ]