User manual JWIN JK-3030 INSTRUCTION MANUAL

[. . . ] Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions All operating and use instructions should be followed. Water and Moisture The appliance should not be used near water for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like. Carts and Stands The appliance should be used only with a cart or stand that is recomended by the manufacturer. 1 6A. [. . . ] 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding electrodes, and requirements for the grounding electrode. Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 2 17. Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the unit through openings. Damage Requiring Service The appliance should be serviced by qualified service personnel when: A. The power supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or damaged. Servicing The user should not attempt to service the appliance beyond instructions given in the operating instructions. All other servicing should be referred to qualified service personnel. POWER LINES SERVICE ENTRANCE CONDUCTORS GROUND CLAMPS STANDOFF INSULATORS MAST b SERVICE ENTRANCE EQUIPMENT ANTENNA LEAD IN WIRE GROUND WIRE GROUND CLAMPS ANTENNA DISCHARGE UNIT c TO EXTERNAL ANTENNA TERMINALS OF PRODUCT GROUND WIRE a. a POWER SERVICE GROUNDING ELECTRODE SYSTEM (e. g. ntenor water pipe) BONDING JUMPER OPTIONAL ANTENNA GROUNDING ELECTRODE DRI/ENG FEET (2. 44 m) INTO THE EARTH IF REQUIRED BY LOCAL CODES SEE NEC SECTION 810-21 (1) FIGURE 73. 1 EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED IN ARTICLE 810RADIO AND TELEVISION EQUIPMENT a. 17 AWG (1. 0 mm2) copper-clad steel or bronze wire, or larger, as a ground wire. Secure antenna lead-in and ground wire to house with stand-off insulators spaced from 4 - 6 feet (1. 22 - 1. 83 m) apart. Mount antenna discharge unit as close as possible to where lead-in enters house. 6 AWG (13. 3 m 2) copper, or the equivalent when a separate antenna-grounding electrode is used. See NEC Section 810 - 21 (i). 3 ! " # ! $ %& ' " $ % & ' # 1. 10. HEADPHONE JACK POWER INDICATOR TV MONITOR FUNCTION SELECTOR DIAL SCALE VOLUME CONTROL BAND SELECTOR FM STEREO INDICATOR TUNING KNOB POWER KNOB BUTTON 11. 19. SPEAKER GRILL DC 12V JACK TELESCOPIC ANTENNA EXTERNAL TV ANTENNA JACK BATTERY DOOR VERTICAL V-HOLD BRIGHTNESS CONTRAST WEATHER CHANNEL BAND SELECTOR POWER SUPPLY AND CONNECTION Battery Operation Remove Battery Compartment Cover. Put in 10 batteries (UM-2 or equivalent) in correct polarity as indicated inside the compartment. Note: Check your batteries regularly, old or discharged batteries should be replaced. [. . . ] Adjust V-HOLD, BRIGHTNESS and CONTRAST on back to the desired level. EXTERNAL ANTENNA If desired you may hook up an outdoor antenna to your portable TV set, which will give you greater range and clearer reception for the channels which are difficult to receive with the built-in antenna. To hook up the outdoor antenna, just connect the VHF or UHF antenna to the Antenna Adaptor (included in your set), and then connect the Antenna Adaptor to the External Antenna Jack. Note: When the antenna adapter is plugged into the external antenna jack, the telescopic antenna is automatically disconnected. WEATHER BAND AND ALERT OPERATION Set Function Selector to WB position. Select the appropriate Weather Band frequency with Weather Channel Band Selector for the best reception. [. . . ]