Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual JWIN JL-707. We hope that this JWIN JL-707 user guide will be useful to you.
Lastmanuals help download the user guide JWIN JL-707.
Detailed instructions for use are in the User's Guide.
[. . . ] The clock display will blink to indicate a power interruption and that the display time is incorrect. To set the correct time, press the MINUTE button (10) or HOUR button (9) until the correct time is displayed while pressing and holding the TIME SET button (6). Open the Battery Compartment cover and fit a 9V battery. The purpose of this battery is to store the information relating to the alarm time and to keep the clock functioning in the event of disconnection from the power supply or power interrruption. [. . . ] In case of the power failure, the clock will continue to keep time but will not display it. THE LED DIGITAL CLOCK AND THE PROJECTION CLOCK MUST BE SET SEPARATELY TIME SETTING FOR PROJECTION - To set HOUR, press simultaneously the HOUR BUTTON (21) and the TIME SET BUTTON (20). Keep them depressed until the correct hour is displayed. - To set MINUTE, press simultaneously the MINUTE BUTTON (22) and the TIME SET BUTTON (20). Keep them depressed until the correct minute is displayed. - Focus setting : To adjust the projection focus, turn the FOCUS ADJUSTMENT KNOB (23) until the projected time is clearly shown on the ceiling or wall. NOTE : THE MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
TO SET OR RESET THE ALARM TIME 1. Press and hold the ALARM SET/OFF button (5). While holding the ALARM SET/OFF button (5), press the HOUR button (9) and MINUTE button (10) to advance the time until the desired alarm time is shown on the display. Set the alarm time as previously instructed. Press the MINUTE button (10) to set the minute while holding the SLEEP SET button (7). The sleep time will decrease from 59 minutes to zero. Notes: To increase the sleep time over 1 hour, press the HOUR button (9) to set the hour while holding the SLEEP SET button (7). The display will be changed to 1 hour and 59 minutes, which is the maximum sleep time setting. Press the MINUTE button (10) to decrease the minute. Release the SLEEP SET button (7) when you finish to set the sleep time. The radio will now operate until the sleep time has elapsed or may be switched off by pressing the SNOOZE/SLEEP-OFF button (4).
Notes: Pressing the SLEEP SET button (7) again after setting the sleep time will reset the sleep time to 59 minutes. In this case, you need to set the sleep time again. TO TUNR ON THE RADIO The AM radio band uses an internal antenna to receive a signal. Rotate the unit to get the best reception for AM. [. . . ] Rotate the unit to get the best reception for AM. For FM, ensure that the FM pig-tailed antenna is completely uncoiled and extended. Set the ON/OFF/AUTO switch (1) to `ON' position 2. Set the AM/FM switch (12) to the desired band. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JWIN JL-707
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual JWIN JL-707 will begin.
