User manual JWIN JT-P87

[. . . ] - The middle line displays the number of in-coming calls. - The bottom line displays the name of the caller. The following table explains the LCD Messages that will display in the window of your JT-P87: DISPLAY FILTER NEW CALL# RPT# ___:__ AM/PM __/__ MSG VIP REJ DEFINITION The filter function is activated There are new incoming calls Shows the total number of incoming calls Shows the total number of repeated in-coming calls Hour, minute day, night, month, date (Current time & date) Message The displayed number has been set in the VIP memory bank The displayed number has been set in the REJ (rejected) bank If a number was received more than once, the LCD will display only the time and date of the last call. If the time and date of an incoming call is different than that of your Telephone Company (different time zone), the telephone will adjust the time to reflect the time according to your Telephone Company. [. . . ] When you retrieve your messages, this code and the icon will disappear. MES Viewing the Caller ID List Press [ ] or [ ] to view the last incoming calls (max. Press [ ] or [ ] to select the wanted number. Press [ ] or [ ] to select the wanted number. Press [DIAL] twice to automatically dial the selected number. Use [DEL] to erase an unwanted phone number. Use [SET] to confirm changes and the cursor will move to the Name position. Use the keypad to enter new letters. NOTE: Use the "0" key to insert a blank space during entry. 3 OPERATION MAKING A CALL 1. Enter the phone number you wish to call. If necessary use [DEL] to correct the number, then 3. Press [SPEAKER] or [RD/BACK] to dial the number. Use [UP], [DOWN] to review and select incoming call records. Use [UP], [DOWN] to review and select from the list of incoming call records. Press [BOOK] to save the record in the phone book. Use [UP], [DOWN] to review and select the incoming call records. NOTE: Holding [DEL] for more than 4 seconds will delete the entire incoming call record list. Press [DIALED] to review the last dial out record, and 2. Press [DIALED] repeatedly to review all records. Press [DEL] to delete a dialed call record. Use [UP], [DOWN] to review and select records, or enter the first letter of the record by pressing the corresponding key. You can press the same key continuously to go through a range beginning with the same letter. Press [RD/BACK] to dial a number after the record is located. AUTO REDIAL When a dialed number is busy: 1. [. . . ] The LCD will display "UPDATE DATE CODELOCK". Press [ DEL] to erase the locked digits and press [CODE] again to confirm. 5 Modify the PIN Code 1. Enter the preset PIN Code: 8888 and press [CODE] again. . The LCD will display "UPDATE CODELOCK". [. . . ]