User manual JWIN JV-TV5020

[. . . ] JV-TV5020 USER'S MANUAL CUSTOMER SERVICE INFORMATION JWIN New York Office 51-41 59th Pl. , Woodside, NY 11377 USA Toll Free Number: 1-866-807-JWIN E-mail: custservice@jwin. com 8-CHANNEL QUAD SPLITTER JV-TV5020 USER'S MANUAL USER'S MANUAL JV-TV5020 outlet. Do not defeat the safety purpose of the polarized plug. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 6-2. Other Keys FREEZE : Enables selected channel freezes in QUAD mode, FULL mode, MODE function. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER FOR SERVICE TO QUALIFIED SERVICE PERSONNEL. 1 ~ 8 : Enables selected channel be displayed in full screen. [. . . ] Press the ENTER button again to stop flashing the Time. Press the MODE/MENU button to return to the Page 2 INDIVIDUAL menu. LOAD The video signal is normally terminated by 75 ohms. But in case the signal is distributed to a number of lines, only one of lines is needed to be terminated by 75 ohms (1Vp-p), while the other lines are terminated by High impedance status The following connections are located on this splitter. Do not plug the power supply into this splitter until all connections are made. FRONT VIEW Fig. 1 (CONNECTION LOCATIONS ­ Front View) Note. (1) This splitter has 2pages (is consists of page A with channel 1~4 and page B with channel 5~8). (2) All buttons have a different function by press button short or long. (3) To go into the ZOOM or MENU or VCR mode, press the corresponding button long. (4) By pressing channel button shortly, channel moves to anther channel where is located in the same place on different page. (5) By pressing Quad button shortly in Quad mode, the screen moves to anther Quad mode on different page. (6) If you press channel button long, the screen became freeze frame. (2Vp-p). The 75 ohms or the HI can be selected by pressing the ENTER button. Page 4 BUZZER Menu Press the MODE/MENU button again, the following menu screen will be displayed. [ BUZZER ] KEY BUZZER LOSS BUZZER ALARM BUZZER ALARM TIME EXIT : : : : [Y] [Y] OFF OFF - PAGE4 - 8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER JV-TV5020 USER'S MANUAL USER'S MANUAL Fig. 8 Page 4 Menu JV-TV5020 When it is set to be zero (OFF) the corresponding camera will be skipped in the Automatic sequential switching mode. - Buttons on the Front View 16 Title [ INDIVIDUAL ] Dwell Alm Load 03s 03s 03s 03s 03s OFF OFF OFF OFF 75 75 75 75 POWER button is to turn the system ON or OFF. Buttons CH1(ch5), CH2(ch6), CH3(ch7) and CH4(ch8)are to select a channel. QUAD If press button, conversion and page (Page A, Page B) conversion in Quad screen . ZOOM button displays the 2x ZOOM picture in any mode. MODE button displays the PIP or 2PIP. CH1: C 1 CH2: C 2 CH3: C 3 CH4: C 4 QUAD A: PAGE 1 EXIT - PAGE2 - Fig. Camera Title - Place the green color character to the date digit using the , , and the buttons and press the ENTER button. The first empty box will be flashing Select the position you want to enter the letter or the numeric number using the , buttons. [. . . ] Connect the DC power cord between this splitter and your wall mounted power outlet. Turn on the power of all cameras and this splitter. A quadrant display should be seen on the monitor. Installation with a VCR or Time Lapse Recorder This splitter may be installed with a standard VCR or a Time Lapse Recorder. Perform following steps to install the splitter with them. - PAGE1 - Fig 6. [. . . ]