User manual JWIN JX-CD1000

[. . . ] Disconnect the power cord from the mains if the unit is not going to be used for long time. RADIO OPERATION 1 2 3 4 5 6 Attach the plug to the wall socket. Press the Power/ Stand-by button so that it stays depressed. Place the FUNCTION selector switch in the position marked TUNER. Place the RADIO WAVE BAND selector switch in the appropriate position depending on which waveband you wish to hear. [. . . ] Disc play will start at the The CD player will skip forward to the next track each time the Forward Search/Skip button ( ) is pressed. Repeatedly pressing the Forward Search/Skip button makes the CD player skip forward through the disc track by track. Once the beginning of the last track is reached the CD player will go to track 1. TO S K I P BACK TO THE P R E V I O U S TRACK l l For example to skip back to the beginning of track 3 while track 4 is playing. Press the Reverse Search/Skip button ( beginning of track 3. Disc play will start at the 4 004AV1R. p65 4 2004/2/10, PM 04:07 The CD player will skip back one track each time the Reverse Search/Skip button ( ) is pressed. If this button is pressed in the middle of a track, the CD player will skip back to the beginning of that track. To make it skip back to the previous track press the Reverse Search/Skip button twice. Once the beginning of the first track is reached, the CD player will go back to the last track. Notes: The Forward and Reverse Search/Skip buttons can be used to select a desired track to play from before disc play starts. In this case the number of the selected track will be displayed until the Play/Pause button is pressed. SEARCH During playback, press and hold the Forward Search/Skip or Reverse Search/Skip button will cause the player to scan through the current track. At the end of a track the player will skip to the next track and continue scanning. When the player reaches the end of the final track during Forward Search, or the beginning of the first track during Reverse Search, it will stop scanning. REPEAT DISC PLAY Use the Repeat button to listen to an entire disc, one track, or a programmed sequence repetitively. FOR REPEAT PLAY OF ONE TRACK Press the Repeat button once. The Repeat (REP 1) indicator will be displayed in the CD display. Select the desired track by repeatedly pressing the Forward or Reverse Skip Track button . The selected track will be shown in the CD display. The selected track will then begin playing through to its end. At which point it will automatically return to the beginning of that track. This will continue until the Stop button is pressed. If the Repeat button is pressed 2 more times during play, the repeat indicator will go off, repeat play will end, and normal disc play will resume from that point. FOR REPEAT PLAY OF ALL THE TRACKS ON THE CD Press the Repeat button twice. The Repeat (ALL) indicator will be shown on the display. The disc will then begin playing through to the end of the last track. At which point it will automatically return to the beginning of the first track. This will continue until the Stop button is pressed. [. . . ] Never allow your fingers to touch the shiny, imprinted side of the disc. Do not attach adhesive tape, stickers, etc. Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. [. . . ]