User manual JWIN JX-CD280 Instruction Manual

[. . . ] PORTABLE COMPACT DISC PLAYER INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE USING YOUR UNIT MODEL: JX-CD280 LOCATION OF CONTROLS CD SKIP ( ) BUTTON PROGRAM BUTTON LCD (Liquid Crystal Display) PLAY/PAUSE (power on) STOP BUTTON (power off) CD MODE BUTTON HOLD SWITCH BATTERY DOOR DC IN 4. 5V ADAPTER JACK (NOT INCLUDED) LINE OUT JACK PHONES JACK DOOR OPEN VOLUME CONTROL BASS BOOST SWITCH CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size "AA" alkaline batteries (not included), or use the AC adapter (not included) AC ADAPTER OPERATION Plug one end of the AC adapter into the DC 4. 5V jack, then plug the other end into AC wall outlet. (adapter not included) PRECAUTIONS ON USING THE AC ADAPTER Put in correct specs for AC adapter. Please make sure you purchase the correct AC adapter. Use of an incorrect AC adaptor will damage the unit. [. . . ] to skip to the beginning of the track currently playing. twice or more to skip to previous tracks. FORWARD/REVERSE SEARCH Press and hold the skip ( ) button during play to scan the disc at high speed. When the desired section of the disc is found, release the button. ----forward ----reverse ) while playing, it will scan the current · If you press and hold the skip button ( playing track forward at high speed. ) while playing, it will scan the current · If you press and hold the skip button ( playing track backwards at high speed. 3 BASS BOOST Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, sometimes, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature. ON OFF BASS BOOST PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed. ) During programming, "PROG" flashes in the display. NOTE: Programming is possible in the STOP mode. 1 3 2 5 3 9 Press the PROGRAM button in the STOP MODE. The "PROG" appears in the display. ) to select the first track to be programmed. Press the skip button ( Press the PROGRAM button again to enter the track into the memory. Repeat steps 2 to 3 to program other track till you finish. After programming is finished, press the PLAY/PAUSE Button. Note: Programmed play will begins automatically if you program 24 tracks. "PROG" shows steady in the display and programmed play begins. The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button. To check the program, press the STOP Button and then the PROGRAM button. THE CD MODE BUTTON This button can be pressed during play to accomplish many different kinds of play. CD Mode button pressed 3 times for INTR play. 5 times for return to normal play. SINGLE TRACK REPEAT Press the CD Mode button once during play, and the " 1" will appear in the display. The current track will be played over and over again until Stop button is pressed. ALL TRACKS REPEAT/CONTINUOUS PLAY Press the CD Mode button twice during play. [. . . ] To keep the disc clean, do not touch the surface of the disc. Discs should be returned to their cases after use to avoid serious scratches that could cause the laser pickup to skip. Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Prolonged exposure to high temperatures can warp the disc. [. . . ]