User manual JWIN JX-CD404D

[. . . ] Don't touch the AC adapter with wet hands. Doing so is dangerous, as this could result in an electric shock. If the adapter plug is insert into the DC Jack of the Player, the power supply automatically switch to the AC/DC power and the batteries supply will be disconnected. DC OPERATION ALKALINE BATTERY INSTALLATION (NOT SUPPLIED) Insert two AA batteries (not supplied) into the battery compartment on the bottom of the unit. Be sure to observe the proper polarity. CHARGING AND USE OF RECHARGEABLE BATTERIES This unit can fully recharge the specified rechargeable batteries, in approximately 15 hours. [. . . ] Note: Both 8cm and 12cm discs can be played in the unit. Place only one disc at a time in the CD compartment. TRACK SEARCH · · · · Press the Press the Press the Press the and button during play to skip to the desired track. to skip to the beginning of the track currently playing. twice or more to skip to previous tracks. FORWARD/REVERSE SEARCH Press and hold the skip ( ) button during play to scan the disc at high speed. When the desired section of the disc is found, release the button. ----forward ----reverse ) while playing, it will scan the current · If you press and hold the skip button ( playing track forward at high speed. ) while playing, it will scan the current · If you press and hold the skip button ( playing track backwards at high speed. 3 BASS BOOST Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, sometimes, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature. ON OFF BASS BOOST PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed. ) During programming, "PROG" flashes in the display. NOTE: Programming is possible in the STOP mode. 1 3 2 5 3 9 Press the PROGRAM button in the STOP MODE. Press the CD Mode button 4 times during playing. The "RAND" will appear in the display. The display will show the first track the CD player select. Press the skip button to skip the next random song. To stop the function, press the CD Mode button once more or press the Stop button. CONNECTING TO HOME STEREO SYSTEMS The line out jack is made to accept a stereo mini plug (3. 5mm). By using a commercially available audio line cable, simply connect the cable's mini plug to line out jack on your player, and the other appropriate end to CD/AUX input(s) of your home stereo system. NOTE: Always switch the power off before making any connections between the player and any other set. NOTE: The volume control or the player becomes inoperable when the line out jack is used. Adjustments are made on your audio system. LINE OUT CLEANING CLEANING THE PICKUP LENS A dirty lens will cause sound skipping. If the lens is very dirty, the player may not work. Open the CD door and clean the lens as follows: · FINGERPRINTS ON LENS Use a cotton swab starting in the middle and working to the outside edge, pay attention in doing this operation or the pick up lens could be damaged. CLEANING THE CABINET Wipe with a soft cloth. [. . . ] · The unit will not play a disc that has been inserted upside down, or discs that do not conform to the Compact Disc standard. Also, the unit might not play discs that are scratched, soiled or carry fingerprints. · Both 8cm and 12cm discs can be played in this unit. TECHNICAL SPECIFICATIONS CD PLAYER SECTION Frequency response . . . . . . . . . . . . . . . . . . . . . . 20Hz-20KHz Wow and flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]