User manual JWIN JX-CD477 Instruction Manual

[. . . ] PORTABLE COMPACT DISC PLAYER WITH ANTI-SHOCK 10SEC. OP EN INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE USING YOUR UNIT MODEL: JX-CD477 LOCATION OF CONTROLS PROGRAM ANTI-SKIP CD MODE LCD DISPLAY CD SKIP STOP BUTTON (power off) PLAY/PAUSE (power on) (NOT INCLUDED) DC IN 4. 5V ADAPTOR JACK LINE OUT JACK PHONES JACK RECHARGE INDICATOR VOLUME CONTROL BASS BOOST HOLD EN OP DOOR OPEN RECHARGE CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size "AA" alkaline batteries (not included), or use the AC adaptor 4. 5V 600mA (not included) AC ADAPTOR OPERATION Plug one end of the AC adaptor into the DC 4. 5V jack, BATTERY DOOR then plug the other end into AC wall outlet. (not included) PRECAUTIONS ON USING THE AC ADAPTOR Put in AC adaptor spec. Please make sure you purchase the correct AC adaptor. Use of an incorrect AC adaptor will damage the unit. Don't touch the AC adaptor with wet hands. [. . . ] ) while playing, it will scan the current · If you press and hold the skip button ( playing track backwards at high speed. BASS BOOST Use the Bass Boost function to increase the bass output when listening with headphones. During bass boost on setting, sometimes, you may hear some distortion, adjust the volume control to a lower level when using the bass boost feature. PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed. ) During programming, "PROG" flashes in the display. NOTE: Programming is possible in the STOP mode. Program number Track number 1 3 2 5 E. 3 3 9 1. 5. Press the PROGRAM button in the STOP MODE. The "PROG" appears in the display. ) to select the first track to be programmed. Press the skip button ( Press the PROGRAM button again to enter the track into the memory. Repeat steps 2 to 3 to program other track till you finish. After programming is finished, press the PLAY/PAUSE Button. "PROG" shows steady in the display and programmed play begins. The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button. To check the program, press the STOP Button and then the PROGRAM button. THE CD MODE BUTTON This button can be pressed during play to accomplish many different kinds of play. CD Mode button pressed Once for single track repeat. 5 times for return to normal play. SINGLE TRACK REPEAT Press the CD Mode button once during play, and the " 1 " will appear in the display. The current track will be played over and over again until Stop button is pressed. ALL TRACKS REPEAT/CONTINUOUS PLAY Press the CD Mode button twice during play. And the " ALL" will appear in the display. The all tracks on disc will be played over and over again until Stop button is pressed. INTRO PLAY Plays the first 10 seconds of all tracks once, then stops. This is useful if you do not remember the song titles. Press the CD Mode button till the `INTR' appear in the display. The first 10 seconds of the tracks will be played once, then stops. To stop the intro play and start the normal play. [. . . ] optical 3-beam semiconductor laser (780 nM wavelength) GENERAL Power supply DC . . . . . . . . . . . . . . . . . . . . . . . . . . 3V using two "AA" batteries AC/DC adaptor 4. 5V 600mA Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142mm(W)x134mm(D)x28. 5mm(H) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 grams E. 6 TROUBLE SHOOTING GUIDE SYMPTOM CAUSE Dead or weak batteries. SOLUTION Replace both batteries. [. . . ]