User manual JWIN JX-CD492

[. . . ] R PORTABLE CD PLAYER with MP3 DIGITAL RADIO CASSETTE RECORDER MODEL JX-CD492 OWNER'S MANUAL Visit our Web Site: http://www. jwin. com WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock persons. ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Warning: to reduce the risk of electric shock, do not remove cover (or back) no user-serviceable parts inside. Refer servicing to qualified service personnel. 1. Install in accordance with the manufacturer's instructions. [. . . ] Put a disc inside and then close the CD door. Note: Ensure the disc is pushed fully and locked in place. Stop condition (TOC display) After reading TOC Note: This unit is CD-R / -RW compatible. To play the disc Press the PLAY/PAUSE button (18) or (28) to play the CD. PLAY/PAUSE Playing track 1 7 Skip and Search Function Press the SKIP Next or Back buttons (14)/(17) or (30)/(31) briefly. SKIP/ TUN DN SKIP/ TUN UP OR IN PLAY MODE PRESS ONCE PRESS TWICE BACK TO THE BEGINNING OF PREVIOUS THE CURRENT TRACK TRACK NEXT TRACK IN STOP MODE PRESS ONCE PREVIOUS TRACK NEXT TRACK Press and hold the SKIP button during playback : : FAST FORWARD : FAST BACKWARD NOTE : During search mode low level audio will be heard to assist in locating the correct point in the track. To repeat a track or disc Press the PLAY MODE button (29) on the remote control one time, "one track repeat" will be active. (REPEAT Flashes) PLAY/ MODE One track repeat (flashing) With one more press, "all track repeat" will be active. (REPEAT ALL will show steadily) With one additional press, the repeat mode is cancelled. PLAY/ MODE All track repeat (steady) Random play function In CD stop mode, press the PLAY MODE button (29) on remote control three times (RANDOM displayed), then press PLAY/PAUSE button (18) or (28) to start random play. Press PLAY MODE button (29) once again to change normal playing mode. PLAY/ MODE Random playing start 8 PROGRAMMED PLAYBACK This CD player enables you to program up to 20 tracks in the sequence of your choice. Press the PROGRAM button (21) or (27) one time. Continue to program, repeat steps 2 and 3 for each selection. When program is full PROGRAM Reviewing programs Press the PROGRAM button (21) or (27) repeatedly. The track number programmed on each program number will be displayed. Press the SKIP Forward or Backward button (14)/(17) or (30)/(31) to select the desired track to be programmed. SKIP/ TUN DN SKIP/ TUN UP 5. Press PLAY/PAUSE button (18) or (28) to play the programmed tracks. OR Choose track 4 Clear the program Press the PROGRAM button (21) or (27) to recall previously programmed track ("MEMORY" icon flashes), then press CD stop button to cancel the preset programs or change function mode or open the CD door. Press the PROGRAM button (21) or (27) one time, then the selected track, e. g. , track 4 is stored. PROGRAM 9 PLAYING MP3 DISCS 1. Set the FUNCTION selector (8) to CD mode (CD / RADIO OFF) 2. Press CD SKIP / buttons (14)/(17) or (30)/(31) to select desired track. TAPE RADIO CD SKIP/ TUN DN SKIP/ TUN UP OR 2. If there is no disc inside or disc damaged, a "- - -" display will be appear. When there is no disc Folder 2 track 3 selected Loading a disc 1. Lift up the CD door lid (6) to open the CD door. 3. Press the PLAY/PAUSE button (18) or (28) to start playing. 2. Put a disc inside and then close the CD door. Note: Ensure the disc is pushed fully and locked in place. After reading TOC PLAY/PAUSE Playing track 3 of folder 2 Note: This unit is CD-R / -RW compatible. Press the FOLDER UP or DN button (20)/(12) or (26) to select desired folder. Total tracks of select folder will then be shown. Folder 2 selected Tracks of folder 2 To pause the CD Press the PLAY/PAUSE button (18) or (28) while the disc is playing. Press it again to resume playing. PLAY/PAUSE While paused 10 To stop the disc playing Press STOP button (13) or (32). Stop condition (TOC display) Note: Once your desired mode selected, press the PLAY/PAUSE button (18) or (28) to start playback from stop mode. [. . . ] Do not allow any cleaning material to fall into the tape assembly. COTTON SWAB CAPSTAN RECORD/PLAY HEAD CLEANING THE UNIT PINCH ROLLER To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution when cleaning and wiping the plastic parts. If the cabinet becomes dusty wipe it with a soft dry dust cloth. [. . . ]