User manual JWIN JX-CD5500

[. . . ] Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. [. . . ] Tune to the station you wish to store by pressing TUNING UP or DOWN button (15) or (33). 2. Press the FUNCTION button (3) or (32) to select your desired mode (CD/AUX/TUNER). FUNCTION 2. Press the STOP/BAND button (11) or (29) for AM or FM band. Example : FM mode The unit enables you to program 10 stations of FM and 10 stations of AM band. Press the POWER button (1) or (31) to turn off the unit. POWER BASIC OPERATION Volume Control Once the required mode has been located, adjust the VOLUME button (14) or (37) up or down to the desired level. 3. Press the TUNING Up or Down button (15) or (33) to tune to the desired station. Press the FOLDER UP or FOLDER DOWN button (5)/(6) or (28)/(36) repeatedly to set the desired preset station number. ("MEM" still flashing) Preset Equalization To select desired sound effect, press the EQ button (2) repeatedly to cycle through the preset EQ show on the display -- CLA (Classic), ROCK, POP. FM Stereo/Mono Slide the FM Stereo/Mono switch (27) to choose between FM stereo (2-channel) reception or FM mono (1-channel) reception. If the FM stereo reception is too noisy, choose the FM mono reception setting instead. AUX Operation To listen to audio signals from an external unit through this unit. Connect the right (23) and left (24) plugs from the auxiliary unit. Press the FUNCTION button (3) or (32) select to AUX mode. Operate the auxiliary unit by following it's owners manual. To store other stations, repeat above steps. RECALLING PRESET STATION Press the FOLDER UP or FOLDER DOWN button (5)/(6) or (28)/(36) on main unit or remote control repeatedly to select the desired station. EQ Manual Tuning - Press and hold the TUNING UP or DOWN buttons (15) or (33) until the display approaches your desired station. Then tap the buttons repeatedly until the display shows the exact frequency. Auto tuning - Press the TUNING UP or DOWN buttons momentarily and release. The tuner will move up or down to the next available station. When finished listening, press the POWER button (1) or (31) to turn off the unit. 4. ("MEM" steady on) 7 8 PLAYING COMPACT DISCS 1. Press the POWER button (1) or (31) turn on the unit then press the FUNCTION button (3) or (32) to select CD mode. FUNCTION To play the disc Press the PLAY/PAUSE button (13) or (35) to play the CD. Skip and Search Function Press the SKIP Next or Back buttons (15) or (33) briefly. Playing track 1 2. If there is no CD inside or disc damaged, a "- - -" display will appear. When there is no disc IN PLAY MODE PRESS ONCE PRESS TWICE BACK TO THE BEGINNING OF PREVIOUS THE CURRENT TRACK TRACK NEXT TRACK IN STOP MODE PRESS ONCE PREVIOUS TRACK NEXT TRACK To pause the CD Press the PLAY/PAUSE button while the disc is playing. [. . . ] Solution Retune the AM (MW) or FM broadcast station. Rotate unit until best reception is obtained. FUNCTION Selector not set to Set FUNCTION Selector to RADIO position. Volume at minimum Increase Volume. Compact Disc Player CD Player will not play. FUNCTION selector not set to CD Set FUNCTION selector to CD position. CD is not installed or installed incorrectly. [. . . ]