User manual JWIN JX-CD930

[. . . ] Limited Warranty 90 Days Labor One Year Parts jWIN Electronics Corp. ("jWIN") warrants the product to be free from "Defects" in materials under normal use for a period of " One Year " from date of original purchase. The Warranty is " Not " transferable. jWIN agrees, that within the initial "90 Day " period to repair the product if it is determined to be defective at " NO Charge ". [. . . ] Please unplug the AC adaptor and switch the Recharge switch to the OFF position. DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO CAN CAUSE THE PERFORMANCE OF THE RECHARGEABLE BATTERIES TO DETERIORATE. Note: You may play DISC'S whilst charging the batteries. If the operating time decreases drastically even when the rechargeable nickel-cadmium batteries are properly recharged, purchase a new set of rechargeable nickel-cadmium batteries. Avoid dropping the unit as this may cause damage. 7 · 4 5 6 When the unit is turned on, the "ASP" function is automatically turned on, and shown on display "ESP". If ASP function is not required, please press ASP button to turn it off. 8 CD PLAY Playback information If a CD Rewritable (CD Recordable) is not recorded properly. For CD Audio, uses FINALIZE on your CD recorder to complete the recording. Playback will stop if you open the CD lid. While the CD is read, "ESP" flashes. If there is no activity for 10 seconds, the unit will clear the display, and if there is no activity after another 50 seconds, the unit will switch off automatically to save energy. Any settings like program resume and playing modes will be then lost. Volume and sound adjustment Adjust the volume by using VOLUME control. DBBS ­ Dynamic bass boost System Switch the DBBS slider to ON position to activate the DBB sound. Note: The DBB sound option is only activated in the Headphone mode. FEATURES Selecting a track and searching Selecting a track during playback Briefly press SKIP+ / SEARCH or SKIP- / SEARCH button once or several times to skip to the current, previous or subsequent track. Playback continues with the selected track and its number is displayed. Selecting a track when playback is stopped 1 Press SKIP+ / SEARCH or SKIP- / SEARCH button once or several times. 2 Press PLAY / PAUSE button to start CD play. The playback starts with the selected track. FEATURES Programming track numbers You can select up to 24 tracks and store them in the memory in a desired sequence. 1 While playback is stopped, press PROGRAM to store the track. [. . . ] Is the cigarette lighter Switch on ignition or insert batteries. Playback is Is the disc cover closed Close the disc cover tightly. during playback CD Is there condensation on Wait until the lens has cleared. Is the CD inserted Place the CD with the label side up. [. . . ]