User manual KANGURU CLONE 4HD

[. . . ] KanguruClone 4HD KanguruClone 4HD USER'S GUIDE 4 Target UDMA IDE hard drive duplicator Copyright 2003, All Rights Reserved. This manual applies to 4. 6. 05 or later versions of the KanguruClone 4HD -1- KanguruClone 4HD Please be aware of the following points before using the KanguruClone 4HD Copyright© 2003, Kanguru Solutions. DOS®, Windows 95®, Windows 98®, Windows NT®, Windows 2000®, Windows ME®, and Windows XP® are registered trademarks of Microsoft Inc. Apple® and Macintosh® are registered trademarks of Apple Computer Inc. [. . . ] Leave the all drives in place after a cloning session has completed. The Compare functions are located under the Copy Mode. By default none of the Compare functions are enabled, so you will have to enter the Setup Menu to select the desired function. Press the left arrow to enter the Setup Menu. Make sure the > arrow is next to Copy by using the up and down arrows, and then press the right arrow to enter the Function menu. You can now select the desired Compare mode (Disk Compare, Brief Compare, or Resize Compare), and use the right arrow to confirm [x]. Press the left arrow two times to return to the main menu. You can now press the right arrow to begin comparing. Once the KanguruClone 4HD has finished cloning, it will display a "V" for passed Target drives, and an "X" for failed Target drives. *Please note that the Compare functions can be used in conjunction with the Copy functions, to achieve an all in one Copy and Compare setting. To do so, simply select a Copy function and a Compare function at the same time. - 11 - KanguruClone 4HD CHAPTER 4 Diagnostic Advanced Features The KanguruClone 4HD includes several diagnostic modes to run reports on a drives physical status. The following modes are used to verify if a drive can be used with the KanguruClone 4HD: · · · · Random Seek ­ randomly reads sectors to see if there are bad sectors in the hard drive. Seek ­ checks the hard drives in a specific pattern to check if there are any bad sectors in the hard drives. Write Pattern ­ checks if there are any sectors that cannot be written to. You can define the pattern in the Configuration mode. Read Verify ­ reads all sectors to check if there are any sectors that cannot be read. To run a diagnostic function: 1. Attach the hard drive(s) that you would like to run the diagnostic tests on. Press the left arrow to enter the Setup Menu. Make sure the > arrow is next to Diagnostic by using the up and down arrows, and then press the right arrow to enter the Function menu. You can now select the desired Diagnostic mode (Random Seek, Seq. Seek, Write Zero, or Read Verify), and use the right arrow to confirm [x]. Press the left arrow two times to return to the main menu. [. . . ] Older hard disks may need more time to initiate the disk before cloning. - 15 - KanguruClone 4HD Warranty This product carries a *1 year limited warranty on the power supply, controller, and all internal components. The warranty does not cover any IDE, SATA, or Power cables. Kanguru Solutions is not responsible for any damages incurred in the shipping process. Any claims for loss or damage must be made to carrier directly. [. . . ]