User manual KANGURU FLASH DRIVE

[. . . ] 10 TURNING THE POWER ON/OFF 11 PLAYING MP3 MUSIC . . . . 13 VOICE RECORDING FUNCTION 14 SETTINGS: EQ (EQUALIZER) . . . 19 LOADING & MANAGING AUDIO FILES 20 CONNECTING TO YOUR PC. . . . . 20 MP3 MANAGEMENT SOFTWARE21 DISCLAIMER. . . . . . . . . . . . . . . . . . . [. . . ] When you press Play/Stop button again, the current track will be played as shown above. The top left corner is the playback time indicator. If you want to select previous/next song, turn the rolling wheel up and down to get the track. The music will stop if you press Play/Stop. By pressing the Play/Stop button for 3 seconds, you can turn the power off. 12 Volume Control The volume steps (see illustration) will increase or decrease when the VOL+/VOL- button is pressed correspondingly. There are 32 volume steps and the volume level ranges from 0 to 31. Menu Mode 1. To enter the Menu mode, press down on the Mode button (in the middle of the rolling wheel). The LCD will display the following: Here are the 7 options available to select from: Music Voice Settings Memory Info Delete Record Return Enter Music Mode Enter Voice Mode Set Parameter Show Memory Info Delete audio files Recording Function Return 13 2. To select an option, use the FF/RW wheel to scroll to the desired option. Then press down on the Mode button to enter that selection. Each screen has a Return option as the last item, which can be used to return to the previous screen. Voice Recording Function There are two ways you can enter the Voice Recording function. Press down on the Mode button to enter the Menu Mode, and scroll to the Record function. Press down on the mode button to begin recording. Or you can press down on the A-B button for three seconds and it will begin to record immediately. 3. To stop recording, simply press the Play button. The . wav files can now be played back in the same manner as MP3 files. 14 Settings: EQ (Equalizer) There are 5 Equalizer modes to select from: Jazz, Classic, Rock, Pop, and Normal. Enter the Mode Menu and select the Settings option. Scroll to the desired EQ setting (Jazz, Classic, Rock, Pop, or Normal) and press down on the Mode button to select that setting. 4. After selecting the EQ setting you will be returned to the Settings menu where you can return to the Main Menu. 5 The EQ setting will appear in the LCD, as show below. Settings: Repeat You can adjust the way files are played on your MP3 player to one of 5 modes: Normal: Plays the MP3s in order and stops after the last file has been played. Preview: Plays the first 10 seconds of all MP3s in order and stops after the last file has been played. [. . . ] Memory Status You could examine the memory usage of the MP3 player without being connected to the PC. Enter the Mode Menu and select the Memory Info option. The internal memory info will be displayed on the LCD screen showing the total capacity as well as the amount of free memory. (shown below) 19 Loading & Managing Audio Files Connecting to your PC To load audio files or data onto your MP3 player you must connect the drive to a PC. [. . . ]