User manual KARCHER BALAI SC1

[. . . ] EN EN EN EN EN EN EN 5 5 6 6 7 8 8 Description of the Appliance These operating instructions describe the maximum equipment. Depending on the model, there are differences in the scopes of delivery (see packaging). A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 B1 B2 B3 B4 C1 C2 C3 D1 D2 E1 E2 F1 F2 F3 G1 H1 Safety lock Filling hole for water Steam button Child lock Carrying handle Mains cable with mains plug Cable clamp Indicator lamp (green) – line voltage is on Steam boiler / Water reservoir Steam nozzle Unlocking button Steam gun Unlocking button Steam hose Steam plug Detail nozzle Round brush Power nozzle Hand nozzle Terry cloth cover Extension tubes (two tubes) Unlocking button Floor nozzle Retaining clip Terry floor cloth Accessories bag Measuring cup Dear Customer, Please read and comply with these original operating instructions and the enclosed safety instructions. Keep both booklets for future reference or subsequent owners. [. . . ] storing the Appliance Illustration  Empty water out. Illustration  Coil the mains power cable around the water tank and fasten with a cable clamp. σ Allow the accessories to dry and then store them in the accessories bag. σ Store the appliance at a dry and frost-proof location. How to Use the Accessories Important application instructions Cleaning floor surfaces It is recommended to sweep or vacuum the floor prior to using the steam cleaner. This way, the floor is already cleared of dirt/loose particles prior to the wet cleaning. Refreshing textiles Prior to treatment with the steam cleaner, always check the reaction of the textiles in an inconspicuous location: Steam at first, then let dry and then check for colour or shape changes. Turning on the Appliance  Place the unit securely on a firm surface. σ Insert the mains plug into a socket. 3 minutes the steam cleaner is ready for use. σ Actuate the steam lever to release steam. Notes  Upon initial start-up a small cloud of smoke may exit the steam nozzle. The appliance requires a short run-in time. At first, the escaping steam is irregular and moist, some water drops may leak out. The escaping amount of steam increases continu- EN – 6 11 Cleaning of Coated or Lacquered Surfaces When cleaning painted or plastic-coated surfaces, as found on kitchen and living room furniture, doors, parquet; wax, furniture polish, plastic surfaces or paint can come loose or stains can be created. When cleaning these surfaces, briefly steam a cloth and wipe the surfaces with it. ATTENTION Never direct the steam jet at glued edges as the edge band may loosen. Do not use the steam cleaner on unsealed wooden or parquet floors. Cleaning of Glass In case of low outside temperatures, especially in the winter, warm up the window pane by slightly steaming the entire glass surface. This will prevent tensions on the surface which might lead to glass breakage. Then clean the window surface with the hand nozzle and attachment. Use a squeegee to remove the water or wipe the surfaces dry. [. . . ] Please follow the dosing instructions on the packaging when preparing the descaler. ATTENTION Use caution when filling and emptying the steam cleaner. The descaling solution can have an aggressive effect on delicate surfaces. σ Pour the descaling solution into the boiler and allow it to react for approximately 8 hours. [. . . ]