Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KARCHER EASY-FOAM-SET. We hope that this KARCHER EASY-FOAM-SET user guide will be useful to you.
Lastmanuals help download the user guide KARCHER EASY-FOAM-SET.
Detailed instructions for use are in the User's Guide.
[. . . ] The water pressure may not exceed 25 MPa (250 bar). – The water temperature may not exceed 50 °C. The water flow must be at least 500 l/h (8. [. . . ] Tighten the injector cartridge hand tight with a flat screwdriver 12x2. 13
English
s Unscrew the standard injector cartridge
with a flat screwdriver 12x2. S Push O-rings (3) onto the injector
1b) Assembly with HD 10/25 SX, HD 13/18 SX
s Switch off the high pressure cleaner. s Disconnect the power- and water
supplies. S Release the pressure by opening the
hand gun. Cartridge from the nozzle set (4) and coat with a thin layer of silicone grease. S Push the injector cartridge into the injector housing (2). Tighten the injector cartridge hand tight with a flat screwdriver 12x2. S Screw in and tighten the sealing screw (1) (10 Nm). *Part of the nozzle pack
s Unscrew the fastening screw (1) of the
hood. s Screw in and tighten the enclosed
locking screw. S Replace the unit hood and screw tight. 1c) Assembly in heated units Here the existing dosing system in the unit is used. The injector cartridge from the nozzle pack is not needed. *Part of the nozzle pack
s Unscrew the sealing screw (1) with a
size 8 Allen key. Mount the switchable jet pipe (only with the Inno-Foam-Set)
s Unscrew the standard jet pipe from the
3. To the Foam Set, – on the short pipe of the switchable jet pipe, or – replace the standard high pressure nozzle by a foam nozzle. S Place the HP-round nozzle (2) on the
neck of the moulded part. [. . . ] in heated units and HD 10/25 SX, HD 13/18 SX on the cleaning agent-dosing valve of the high pressure cleaner. After every operation
s Set the cleaning agent dosing to 0. S Rinse the foam nozzle clean for
2 minutes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KARCHER EASY-FOAM-SET
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KARCHER EASY-FOAM-SET will begin.
