User manual KARCHER K 2.250

[. . . ] 10 Español Contents Illustration of appliance General information Safety instructions Operation Transport Storage Maintenance and care Troubleshooting Technical specifications Customer Support Mexico 2 11 12 14 16 16 17 17 18 18 Environmental protection The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. [. . . ] Never leave the appliance unattended when it is in operation. Make sure that the power cable or extension cables are not damaged by running over, pinching, dragging or similar. Protect the power cable from heat, oil, and sharp edges. All current-conducting parts in the working area must be protected against jet water. The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364. The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance. For safety reasons, we recommend that you operate the appliance only via a earth-leakage circuit breaker (max. Cleaning operations which produce oily waste water, e. Engine washes, underbody washes, may only be carried out using washing stations equipped with an oil separator. Safety Devices Caution Safety devices protect the user and must not be modified or bypassed. Power switch The appliance switch prevents unintentional operation of the appliance. Lock trigger gun This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance. Overflow valve with pressure switch The overflow valve prevents the permissible working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high-pressure jet is stopped. If the lever is pulled the pump is turned on again. Prerequisites for the appliance's stability Caution Create stability for the appliance prior to all work on or with the appliance to prevent accidents or damage. € The stability of the appliance is warranted when it is placed onto an even surface. English 13 Operation Scope of delivery The scope of delivery of your appliance is illustrated on the packaging. Check the contents of the appliance for completeness when unpacking. In the event of missing accessories or any transport damage, please contact your dealer. Before Startup Mount loose parts delivered with appliance prior to start-up. [. . . ] Pull on the lever of the trigger gun; the device will switch on. Note: Release the lever of the trigger gun; the device will switch off again. Spray lance with pressure regulation Carrying out the most common cleaning tasks. The work pressure can be stagelessly regulated between "Min" and "Max". [. . . ]