User manual KARCHER K 2.59 M

[. . . ] 0 (04/07) HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview Important Safety Instructions Assembly Instructions Operating Instructions Using the Accessories Working with Detergents Taking a Break Shutting Down & Clean-Up Winterizing and Long-Term Storage Maintenance Instructions Cleaning Tips Troubleshooting Safety Alert Symbols 3 4 6 7 8 9 10 10 11 11 12 14 Owner/User Responsibility The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning information should be emphasized and understood. If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or user must study and maintain for future reference the manufacturers’ instructions. [. . . ] STEP 2: Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position. Note: The actual appearance of the GFCI may be different from this illustration. sTEP 3: Connect garden hose to unit’s water inlet. STEP 6: Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle. STEP 4: Connect garden hose to the cold water source and turn water on completely. STEP 7: Turn on the high pressure washer (I/ON). The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released. English 7 USING THE ACCESSORIES ƽ WARNING To avoid serious injury never point spray nozzle at yourself, other persons or animals. Trigger gun with Electronic Power Control (EPC) Function Changing the pressure is simple with Kärcher's Electronic Power Control (EPC). By pulling/releasing the trigger (the yellow part you grab) for less than one second, the machine will switch pressure settings. You can switch from (3) maximum to (2) medium to (1) delicate pressure and back again. No need to return to the machine or change any lance settings. Spray wand This nozzle features a steady powerful high pressure spray pattern, for general cleaning. Dirtblaster® This nozzle features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This nozzle combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle. Not recommended for soft materials, siding, painted surfaces, decks or autos. Always test an inconspicuous area before cleaning with the Dirtblaster. – Setting 3 - Maximum: Maximum pressure and water flow. This is the rated PSI and GPM of your pressure washer. Note: The EPC setting is saved for only 20 minutes after you finish your work. [. . . ] Recommendations Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results. If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface. When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water. For additional cleaning tips, visit our website at www. [. . . ]