User manual KARCHER K 2-75

[. . . ] Notes about the ingredients (REACH) You will find current information about the ingredients at: http://www. The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. Dear Customer, Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. [. . . ] All current-conducting parts in the working area must be protected against jet water. The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364. the appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance. For safety reasons, we recommend that you operate the appliance only via a earth-leakage circuit breaker (max. Cleaning operations which produce oily waste water, e. Engine washes, underbody washes, may only be carried out using washing stations equipped with an oil separator. Caution Safety devices protect the user and must not be modified or bypassed. power switch The appliance switch prevents unintentional operation of the appliance. Lock trigger gun This lock locks the lever of the trigger gun and prevents the inadvertent start of the appliance. Overflow valve with pressure switch The overflow valve prevents the permissible working pressure from being exceeded. If the lever on the trigger gun is released the pressure switch turns off the pump, the high-pressure jet is stopped. If the lever is pulled the pump is turned on again. Caution Create stability for the appliance prior to all work on or with the appliance to prevent accidents or damage. ­ The stability of the appliance is warranted when it is placed onto an even surface. In the event of missing accessories or any transport damage, please contact your dealer. Illustrations on Page 2 Mount loose parts delivered with appliance prior to start-up. illustration Insert the transport wheels and lock them. Illustration Pull out the clamp for the high-pressure hose from the trigger gun (e. Depending on the model, there are differences in the scopes of delivery (see packaging). [. . . ] After working with detergent, suspend detergent suction hose in a container filled with clear water, switch the appliance on for around 1 minute once the spray lance has been removed and rinse until water runs clear. Press the lever on the trigger gun to release any remaining pressure in the system. Caution In order to prevent accidents or injuries, keep in mind the weight of the appliance when selecting a storage location for it (see Specifications). Prior to extended storage periods, as during the winter, also observe the instructions in the Care section. [. . . ]