User manual KARCHER K 4600

[. . . ] : +49 7195 14-0 Fax: +49 7195 14-2212 DE - 9 9 Contents General information Safety instructions Operation Description of the Appliance Transport Storage Maintenance and care Troubleshooting Helpline Technical specifications CE Declaration EN -1 EN -2 EN -3 EN -3 EN -7 EN -7 EN -7 EN -8 EN -8 EN -9 EN -9 Notes about the ingredients (REACH) You will find current information about the ingredients at: http://www. Htm Warranty The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. [. . . ] Illustration Insert both detergent hoses onto the hose fittings. Install the dosage regulator and connect using 2 screws. Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing. Check the secure connection by pulling on the high-pressure hose. Special accessories Special accessories expand the possibilities of using your appliance. Please contact your KÄRCHER dealer for further information. Before Startup Mount loose parts delivered with appliance prior to start-up. Water supply ṇ Warning According to the applicable regulations, the appliance must never be used on the drinking water supply without a system separator. Note: Impurities in the water can damage the high-pressure pump and accessories. For protection, the use of the KÄRCHER water filter (optional accessory, order no. Install wheels Illustration Push the wheels into the intake and secure with the enclosed plugs, watch for positioning of plug. Install the storage for hand-spray gun Illustration Place the bottom holder into the recesses and push forward until it audibly lcoks in. Insert the top holder and push down all the way. Install the storage hook for the mains connection cable Illustration Press in the storage hook and lock it into the top position. water supply from mains Observe regulations of water supplier. For connection values, see type plate/technical data. Illustration Screw the coupling element (supplied) to the water connection on the appliance. Push the water supply hose onto the coupling unit, then connect it to the water supply. Operation ṇ Danger The trigger gun is subjected to a recoil force when the water jet is discharged. Make sure that you have a firm footing and are also holding the trigger gun and spray lance firmly. Caution Prior to cleaning, make sure that the high pressure is placed safely on level ground. Wear protective goggles and protective clothing during the cleaning process. [. . . ] ƽ Danger Turn off the appliance and remove the mains plug prior to any care and maintenance work. Repair works may only be performed by the authorized customer service. Appliance is not running Pull on the lever of the trigger gun; the device will switch on. Check whether the voltage indicated on the type plate corresponds to the voltage of the mains supply. [. . . ]