User manual KARCHER K3800 ECO

[. . . ] EN 3 EN 4 EN 5 EN 8 EN 8 EN 9 EN 9 EN 10 EN 10 Symbols on the machine The high pressure jet may not be directed at persons, animals, live electrical equipment or at the appliance itself. environmental protection The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. [. . . ] If the lever on the trigger gun is released the pressure switch turns off the pump, the high-pressure jet is stopped. If the lever is pulled the pump is turned on again. 14 EN – 5 16 Spray lance with Dirtblaster 17 Spray lance with pressure regulation (Vario Power) Optional 18 Water filter (order no. 730-059) Switch position "eco" There are the switch positions "1/ON" and "eco" to switch the appliance on. Note: The switch position "eco" allows the control of pressure and leads to water and energy savings of approx. Recommended application ranges for switch position "eco" Connect the high pressure hose to the hand spray gun  Illustration Push the high pressure hose into the trigger gun until it locks audibly. note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Connect high pressure hose to the appliance  Illustration Insert the high pressure hose tightly into the quick coupling on the appliance, it will lock in audibly. note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Water supply ṇ Warning Before Startup Mount loose parts delivered with appliance prior to start-up. Install wheels  Illustration Secure the wheels using the included plug. Install the transport handle  Illustration Place the transport handle into the intake until you feel resistance. Use the heel of your hand or a soft rubber mallet to position it. Attach the accessories net  Illustration Hook the accessories net into the hooks shown in the illustration. According to the applicable regulations, the appliance must never be used on the drinking water supply without a system separator. Caution Always connect the system separator to the water supply, never directly to the appliance! water supply from mains Observe regulations of water supplier. For connection values, see type plate/technical data. σ Figure 1 Screw the coupling element to the water connection on the appliance. 2 Push the water supply hose onto the coupling unit. [. . . ] Pressure does not build up in the appliance  Check setting at the spray lance. σ Appliance ventilation: Switch the appliance on with the high-pressure hose detached and operate (max. 2 minutes) until the water exits the high-pressure connection without bubbles. σ Pull out the sieve in the water connection using flat-nose pliers and clean under running water. [. . . ]