User manual KARCHER K4 PREMIUM

[. . . ] Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. environmental protection The packaging material can be recycled. Please do not place the packaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. [. . . ] Install the storage hook for the mains connection cable Illustration  Press in the storage hook and lock it into the top position. Install the transport handle You will need the 2 included screws as well as a Phillips screwdriver PH 2. Illustration  Slide the transport handle into the guide and secure it with 2 screws. EN – 8 Install the dosage regulator for detergent You will need the 2 included screws as well as a Phillips screwdriver PH 2. Illustration  Insert both detergent hoses onto the hose fittings. σ Install the dosage regulator and connect using 2 screws. Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing. σ Insert the hose drum into the intakes on the transport handle. σ Insert the axle of the hand crank into the guides. σ Install the fixating plate and secure it using 2 screws. σ Press the connecting fitting from the short high pressure hose into the brass intake, secure with clamps. Check the secure connection by pulling on the high pressure hose. Water supply from mains ṇ Warning According to applicable regulations, the appliance must never be used on the drinking water net without a system separator. A suitable system separator by KÄRCHER or alternatively a system separator according to EN 12729 type BA must be used. Water that has flown through a system separator is no longer classified as drinking water. Caution Always connect the system separator to the water supply, never directly to the appliance!Illustration  Screw the coupling element to the water connection on the appliance. Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with backflow valve (Optional accessory, order no. From water butts or ponds (see specifications for max. σ Fill the suction hose with water. σ Screw the suction hose into the water connection of the appliance and insert it into the water source (e. Start up Caution Dry running of more than 2 minutes leads to damage of the high-pressure pump. [. . . ] You will find a list of spare parts at the end of these operating instructions. Warranty The warranty terms published by the relevant sales company are applicable in each country. We will repair potential failures of your appliance within the warranty period free of charge, provided that such failure is caused by faulty material or defects in manufacturing. In the event of a warranty claim please contact your dealer or the nearest authorized Customer Service centre. [. . . ]