User manual KARCHER K4 PREMIUM FULL CONTROL HOME

[. . . ] EN 5 EN 5 EN 5 EN 6 EN 6 EN 6 EN 7 EN 7 EN 8 EN 8 EN 9 EN 9 EN 9 EN 9 EN 10 EN 10 Safety Safety instructions Prior to the first use of this device, the accompanying "Safety instructions for high-pressure cleaners" must be read. hazard levels ƽ DANGER Pointer to immediate danger , which leads to severe injuries or death. WARNING Pointer to a possibly dangerous situation, which can lead to severe injuries or death. CAUTION Pointer to a possibly dangerous situation, which can lead to minor injuries. [. . . ] From water butts or ponds (see specifications for max. Note: With vacuuming operation, the coupling for the water connection is not required. σ Fill the suction hose with water. σ Screw the suction hose into the water connection of the appliance and insert it into the water source (e. Bleed the device as follows prior to operation:  Turn on the appliance “I/ON”. σ Unlock the lever of the trigger gun. σ Push the lever of the trigger gun, the device will switch on. 2 minutes) until the water exits the trigger gun without bubbles. σ Release the lever of the trigger gun. σ Lock the lever of the trigger gun. Full Control System The pressure indicator on the trigger gun shows the currently set pressure level during operation with a Full Control spray lance. Note: The pressure indicator is not significant during operation with the T-Racer and other accessories. Pressure level HARD For example, recommended for Stone terraces made of paving stones or exposed aggregate concrete, asphalt, metal surfaces, garden utensils (wheelbarrow, spade, etc. ) MEDIUM Motorcar / motorcycle, brick surfaces, plastered walls, plastic furniture SOFT Wooden surfaces, bicycles, sand stone surfaces, rattan furniture Operation with detergent MIX ATTENTION The sensitivity of the materials can strongly differ depending on the age and the condition. The so-called recommendations are non-binding. EN – 7 13 Operation with detergent Most KÄRCHER detergents can be bought ready to use in a Plug 'n' Clean detergent bottle. Note: Detergent can only be added when the device is operated in low pressure mode. ƽ DANGER When using detergents, the material data safety sheet issued by the detergent manufacturer must be adhered to, especially the instructions regarding personal protective equipment. σ Remove the cap of the Plug 'n' Clean detergent bottle. Illustration * Optional accessories  Push the detergent bottle with the opening pointing downwards into the connection for the Plug 'n' Clean detergent. σ Turn the spray lance towards "MIX" until the the LED "MIX" is on on the pressure indicator of the trigger gun. Note: This will mix the detergent with the water stream. [. . . ] Appliance is not running  Push the lever of the trigger gun, the device will switch on. σ Check whether the voltage indicated on the type plate corresponds to the voltage of the mains supply. σ Check the mains connection cable for damages. € Allow the device to cool down for one hour. [. . . ]