User manual KARCHER K4800 ECO T 250

[. . . ] EN EN EN EN EN EN EN EN EN 5 6 8 11 11 12 12 13 13 Caution Possible hazardous situation that could lead to mild injury to persons or damage to property. Symbols on the machine The high pressure jet may not be directed at persons, animals, live electrical equipment or at the appliance itself. General information Dear Customer, Please read and comply with these original instructions prior to the initial operation of your appliance and store them for later use or subsequent owners. environmental protection The packaging material can be recycled. [. . . ] Recommended application ranges for switch position "eco" Before Startup Mount loose parts delivered with appliance prior to start-up. Install wheels  Illustration 1 Push the wheels into the intake. 2 Secure the wheels using the included plug. Install the storage for trigger gun  Illustration Place the bottom holder into the recesses and push forward until it audibly locks in. Insert the top holder and push down all the way. Install the transport handle  Illustration Place the transport handle into the intake until you feel resistance. Use the heel of your hand or a soft rubber mallet to position it. 18 EN – 8 Install the dosage regulator for detergent You will need the 2 included screws as well as a Phillips screwdriver PH 2. σ Illustration Insert both detergent hoses onto the hose fittings. σ Illustration Install the dosage regulator and connect using 2 screws. Note: During installation you must make sure that the tongues of the dosage regulator match up with the intended recesses in the casing. Connect the high pressure hose to the trigger gun  Illustration Push the high pressure hose into the trigger gun until it locks audibly. note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. Connect high pressure hose to the appliance  Illustration Insert the high pressure hose tightly into the quick coupling on the appliance, it will lock in audibly. note: Make sure the connection nipple is aligned correctly. Check the secure connection by pulling on the high pressure hose. water supply from mains Observe regulations of water supplier. For connection values, see type plate/technical data. σ Illustration 1 Screw the coupling element to the water connection on the appliance. 2 Push the water supply hose onto the coupling unit. σ Connect the water supply hose to the water supply. [. . . ] Appliance is not running  Pull on the lever of the trigger gun; the device will switch on. σ Check whether the voltage indicated on the type plate corresponds to the voltage of the mains supply. σ Check the mains connection cable for damages. σ Check the settings at the dosage regulator for detergent. [. . . ]