User manual KARCHER K5 PREMIUM FULL CONTROL HOME

[. . . ] EN 5 EN 5 EN 5 EN 5 EN 6 EN 6 EN 7 EN 7 EN 8 EN 8 EN 9 EN 9 EN 9 EN 10 EN 10 EN 10 Cleaning operations which produce oily waste water, e. Engine washes, underbody washes, may only be carried out using washing stations equipped with an oil separator. Work with detergents must only be performed on liquid-tight work surfaces with a connection to the sewer system. Do not let release detergent into waters or earth. [. . . ] Illustration  Screw the coupling element to the water connection on the appliance. σ Attach the water supply hose to the coupling on the water connection. σ Connect the water supply hose to the water supply. Drawing in water from open reservoirs This high-pressure cleaner is suited to work with the KÄRCHER suction hose with backflow valve (Optional accessory, order no. From water butts or ponds (see specifications for max. Note: With vacuuming operation, the coupling for the water connection is not required. σ Fill the suction hose with water. σ Screw the suction hose into the water connection of the appliance and insert it into the water source (e. Bleed the device as follows prior to operation:  Turn on the appliance “I/ON”. σ Unlock the lever of the trigger gun. σ Push the lever of the trigger gun, the device will switch on. 2 minutes) until the water exits the trigger gun without bubbles. σ Release the lever of the trigger gun. σ Lock the lever of the trigger gun. MEDIUM Motorcar / motorcycle, brick surfaces, plastered walls, plastic furniture SOFT Wooden surfaces, bicycles, sand stone surfaces, rattan furniture Operation with detergent MIX ATTENTION The sensitivity of the materials can strongly differ depending on the age and the condition. The so-called recommendations are non-binding. Operation with detergent Most KÄRCHER detergents can be bought ready to use in a Plug 'n' Clean detergent bottle. Note: Detergent can only be added when the device is operated in low pressure mode. EN – 7 13 ƽ DANGER When using detergents, the material data safety sheet issued by the detergent manufacturer must be adhered to, especially the instructions regarding personal protective equipment. σ Remove the cap of the Plug 'n' Clean detergent bottle. Illustration * Optional accessories  Push the detergent bottle with the opening pointing downwards into the connection for the Plug 'n' Clean detergent. σ Turn the spray lance towards "MIX" until the the LED "MIX" is on on the pressure indicator of the trigger gun. [. . . ] Appliance is not running  Push the lever of the trigger gun, the device will switch on. σ Check whether the voltage indicated on the type plate corresponds to the voltage of the mains supply. σ Check the mains connection cable for damages. € Allow the device to cool down for one hour. [. . . ]