User manual KARCHER WD6 P PREMIUM

[. . . ] Safety instructions ƽ DANGER – The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance. € Never touch the mains plug and the socket with wet hands. € Do not pull the plug from the socket by pulling on the connecting cable. [. . . ] ρ The illustrations show the maximum equipment; depending on the model, there are differences in equipment and supplied accessories. When unpacking the product, make sure that no accessories are missing and that none of the package contents have been damaged. If you detect any transport damages please contact your dealer. description of the Appliance Illustrations on fold-out pages!ON/OFF switch for appliance (without built-in socket) Illustration  Position I: Suction or blowing Position 0: Appliance is switched off ON/OFF switch for appliance (with built-in socket) Illustration  Position MAX: Vacuuming or blowing. σ Position MAX: Vacuuming with connected electric tool  Performance regulation: Reduce the suction if necessary during vacuuming, blowing or when working with an electric tool. Machine socket Note: Observe the maximum connected load (see Chapter "Technical data"). illustration  To connect an electric tool. Blowing connection Illustration  Connect the suction hose to the blower connection, this will activate the blower function. filter cleaning button Illustration  For cleaning the flat pleated filter fitted. Note: Do not operate the button when the flat pleated filter is wet. Recommendation: In order to vacuum the floor, attach the handle to the suction hose. 5 m Illustration  Put both suction tubes together and connect them with the handle. Floor nozzle (with switching lever) Illustration For convenient switching between dry and wet dirt:  For vacuuming dry dirt off the floor, use position with extended brush strips. σ For vacuuming water off the floor, use position with extended rubber lips. crevice nozzle  For edges , joints , heaters and hard to reach locations. Adapter Illustration  To connect the suction hose with an electric tool  Adapt the adapter to the connection diameter of the electric tool using a knife if necessary. Flexible tool hose Illustration  For more flexibility when working with electric tools. note: Can also be used with an adapter. Operation ATTENTION Always work with an inserted flat fold filter - during wet as well as dry vacuum cleaning!Before Startup Illustration  Remove the appliance head and take the contents out of the container. σ Turn the container, press in the steering roller in the openings at the base of the container till the endpoint. [. . . ] If the electric tool is switched off, the suction turbine continues to run for approx. 5 seconds in order to vacuum up the remaining dirt in the suction hose. Finish operation  Turn off the appliance and disconnect the mains plug. Empty the container Illustration  Remove the appliance head and empty the reservoir filled with wet or dry dirt. [. . . ]