User manual KATHREIN DCG 10

[. . . ] If you will not be using your receiver for a longer period, you should therefore use the power switch to disconnect it from the power supply to save energy. For shorter breaks, you can switch the receiver to standby on the remote control, which uses only a minimal amount of energy. We wish you good reception and much pleasure using your new DVB-T receiver. Your KATHREIN Euroline team Important Information If you unexpectedly encounter problems with your receiver, please contact your authorised dealer. [. . . ] Press the OK button to confirm your settings. The receiver then jumps automatically to the channel search menu and start autoscanning the complete frequency range. The channels found by the receiver are stored in the preset channel list. You can then use the / buttons as usual to switch between the channels. 10 Operation Channel Selection (TV and Radio) The receiver is shipped with the most popular channels programmed in to it. For ideal reception your terrestrial antenna must be optimally aligned. Note: DVB-T does not currently broadcast radio programmes in Germany. Press the OK button to call up the list of pre-programmed channels. Select the channel using the Note: / buttons and press the OK button. You can also call up the channel list by directly pressing the OK button. To select a channel, key in its number using the remote control. Press the TV/R button to switch from the TV list to the radio list, and press the FAV button to view your Favourites (4 lists). You can scroll through the lists using the Quality/P- and Recall/P+ buttons or the / button(s). Press EXIT to hide the list. 11 Operation Channel Information When you switch channels, the following information is displayed on-screen: - Channel type: TV or radio - The channel name - EPG (Electronic Programme Guide) reception is indicated by the letter "E" - Videotext (Teletext) reception is indicated by the letter "T" - Current channel being received, and time Videotext (Teletext) The receiver continuously transmits the Videotext/Teletext signal, if available, to the TV set. Once you have confirmed a sort order you can no longer access the previous list. 18 Main menu Fav: 1. Press the "Menu" button to access the receiver's menu. Choose "Edit Channel List" and press "OK" to confirm. Press the blue button to access the "Favourites" menu. The four Favourites lists are displayed. Use the / buttons to switch between the displayed channels (the selected channel is highlighted yellow). You can then assign the selected channel to the various Favourites lists by pressing the button in the colour of the relevant Favourites list. When you press the coloured button the number of the selected Favourites list is displayed after the channel (to undo your selection just press the same coloured button again). You can assign any channel to all four Favourites lists. Press the "Exit" button to quit the menu. Press the "Menu" button to access the receiver's menu. [. . . ] If you have changed the receiver's programming and want to reset it to its original setup when shipped, select this line. Press the OK button and key in the password. After about a minute the memory will be updated. Turn the receiver off and back on again at its power switch. [. . . ]