User manual KAWAI CA63

[. . . ] Preparation Before Use Playing the Piano Music Menu CA93/CA63 Owner's Manual Recorder Settings Appendix Thank you for purchasing this KAWAI Concert Artist digital piano. This owner's manual contains important information regarding the usage and operation of the CA93 & CA63 digital pianos. Please read all sections carefully, keeping this manual handy for future reference. Preface About this Owner's Manual Before attempting to play this instrument, please read the Preparation Before Use section from page 10 of this owner's manual. This section explains the name and function of each part, how to connect the power cable, and how to turn on the power. [. . . ] Enable the `Four Hands Mode' function. Store current panel settings as the default (power on) configuration. Reset panel settings back to the original factory configuration. Default setting 0C 0 off High Low off 440. 0 off off - * Default settings will be shown in the first LCD display illustration (i. e. Step 1) for each setting explanation below. Entering the Basic Settings menu Press the FUNCTION button to enter the Functions menu. The Basic Settings menu will be selected automatically. Functions 1. Basic Settings Press the FUNCTION button again to enter the menu. Enter and exit the selected Functions menu Selecting the desired setting After entering the Basic Settings menu: Press the or settings pages. buttons to cycle through the different 1-1 KeyTranspose = 0C Settings page number Cycle through the different settings pages 47 Settings Basic Settings 1 Key Transpose The Key Transpose setting allows the pitch of the CA93/CA63 digital piano keyboard to be raised or lowered in semi-tone steps. This is particularly useful when accompanying instruments with different tones, or when a song learned in one key must be played in another key. When transposed, the song can be played in the original key, yet heard in a different key. 1. Selecting the Key Transpose setting Enter the Basic Settings menu (page 47). The Key Transpose setting will be selected automatically. 1-1 KeyTranspose = 0C 2. Adjusting the Key Transpose value Press the or buttons to increase or decrease the value of the Key Transpose setting. * The keyboard pitch can be raised or lowered by up to 12 semi-tones. 1-1 KeyTranspose = +4 E Press a SOUND SELECT button to exit the Key Transpose setting and return to normal operation. 2 Song Transpose The Song Transpose setting allows the pitch of SMF song files stored on a USB memory device to be raised or lowered in semi-tone steps when played back. 1. Selecting the Song Transpose setting Enter the Basic Settings menu (page 47). Press the or buttons to select the Song Transpose setting. 1-2SongTranspose = 0 Settings 2. Adjusting the Song Transpose value Press the or buttons to increase or decrease the value of the Song Transpose setting. * The song pitch can be raised or lowered by up to 12 semi-tones. 1-2SongTranspose = +2 Press a SOUND SELECT button to exit the Song Transpose setting and return to normal operation. 48 3 Tone Control The Tone Control setting allows the overall sound character of the CA93/CA63 digital piano to be adjusted to provide the best sound quality within the area that the instrument is located. There are five different preset EQ settings available, with an additional `User' setting allowing finer control over the different frequency bands. Tone Control types Tone Control type Off Loudness Bass boost Treble boost Mid cut User Explanation Tone control adjustment is not performed. Emphasises frequencies to retains the instrument's sound character when playing at low volume levels. Emphasises low-range frequencies, creating a deeper sound. Emphasises high-range frequencies, creating a brighter sound. Reduces mid-range frequencies, creating a clearer sound. Allows the low, mid, and high-range frequency bands to be adjusted separately. 1. Selecting the Tone Control setting Enter the Basic Settings menu (page 47). [. . . ] Mounting the main body a Ensure that two or more people undertake the following step of the assembly process. Lift the main body a and carefully place it onto the stand. Position the main body slightly towards the back of the stand, to ensure that the guide screw in the front of the stand is visible when viewed from above. Gently slide the main body forward until it comes to a halt. Guide screw Lift onto stand, slide forward When lifting the main body onto the stand, be careful not to catch/trap hands and fingers. Attach the main body to the stand from below using the two flat-tipped screws with the flat washer and spring washer e, then from behind using the two washers j and two long black screws f. [. . . ]