User manual KAWAI CP155

[. . . ] The GPL and LGPL licensed code in this product is distributed without any warranty. Copies of these licenses are included in this product. You may obtain the complete corresponding source code (as defined in the GPL) for the GPL Software, and/or the complete corresponding source code of the LGPL Software (with the complete machinereadable "work that uses the Library") for a period of three years after our last shipment of the product including the GPL Software and/or LGPL Software, which will be no earlier than December 1, 2011, either (1) for free by downloading it from http://support. Com/download; or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to: KAWAITeK Computer Inc. [. . . ] Duty Cycle(%) [100] CPU Lower Temperature [20] Use the <+> and <-> keys to adjust the lower limit of the CPU temperature. The values range from 20ºC to 75ºC. Duty Cycle(%) [20] Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. When the CPU temperature is under 20ºC, the CPU fan will operate at the minimum duty cycle. KAWAI CP155 3-27 Chapter 3 Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. When the CPU temperature reaches the upper limit, the CPU fan will operate at the maximum duty cycle. Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM] Chassis Fan Profile [Standard] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set the appropriate performance level of the chassis fan. [Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation. The following four items appear only when you set Chassis Fan Profile to [Manual]. PCI ROM Priority [Legacy ROM] [Legacy ROM] [EFI Compatibe ROM] Launch Legacy ROM Launch UEFI Compatible ROM Boot Option Priorities These items specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. To select the boot device during system startup, press <F8> when KAWAI Logo appears. To access Windows OS in Safe Mode, do any of the following: - Press <F5> when KAWAI Logo appears. The number of device items that appears on the screen depends on the number of devices installed in the system. 8 Tools menu The Tools menu items allow you to configure options for special functions. Select an item then press <Enter> to display the submenu. 1 KAWAI EZ Flash 2 Utility Allows you to run KAWAI EZ Flash 2. when you press <Enter> , a confirmation message appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to confirm your choice. Profile UEFI BIOS Utility - Advanced Mode Exit This item allows you to store or load multiple BIOS settings. [. . . ] KAWAI CP155 A-1 Appendices Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. VCCI: Japan Compliance Statement VCCI Class B Statement KC: Korea Warning Statement REACH Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at KAWAI REACH website at http://csr. This product has been designed to enable proper reuse of parts and recycling. [. . . ]